Providing technical information to assist with quick fault code diagnosis. This tool is invaluable for dealer technicians, mechanics and farmers.
Search all 14,929 tractor error codes
Enter your error code and use the Tractor "Make" and "Model" to narrow down your search results
Hear from our happy customers
Client satisfaction is at the heart of what we do. Hear directly from those who have experienced our commitment to quality and service.
Detailed information available
| Error Code | Description | Technical Documentation | Make & Models |
|---|---|---|---|
524224.02 |
Rear PTO Switch Signal Issue, Main Control Module (AIC) |
||
520871.02 |
Internal issue with the configuration of the module. Most likely caused during reprogramming, Main Control Module (AIC) |
||
522876.31 |
CAN BUS Message Fault From the implement and the Main Controller on the Tractor |
||
520872.02 |
Internal issue with the configuration of the module. Most likely caused during reprogramming, Main Control Module (AIC) |
||
000444.04 |
High Amp Draw On Module, Main Control Module (BLC) |
||
522077.11 |
There is an issue with the I tec (headland Management) switch, Main Control Module (AIC) |
||
523349.02 |
Problem with the Auto Steer Switch Signal, Main Control Module (AIC) |
||
523971.03 |
The Signal Voltage From The Rear Hitch Height Control Slide is too high, Main Control Module (AIC) |
||
523971.04 |
The Signal Voltage From The Rear Hitch Height Control Slide is too Low, Main Control Module (AIC) |
||
523971.13 |
The Depth control slide position sensor is not calibrated, Main Control Module (AIC) |
||
524096.02 |
The Hand Throttle Signals Are Not Matching, Main Control Module (AIC) |
||
524096.03 |
The Signal From The Hand Throttle Sensor Is too High, Main Control Module (AIC) |
||
524096.04 |
The Signal From The Hand Throttle Sensor Is too Low, Main Control Module (AIC) |
||
524212.02 |
The Signal Voltage From The Rear Hitch Height Control Slide is out of range, Main Control Module (AIC) |
||
524212.03 |
The Signal Voltage From The Rear Hitch Height Control Slide is too high, Main Control Module (AIC) |
||
524212.04 |
The Signal Voltage From The Rear Hitch Height Control Slide is Low, Main Control Module (AIC) |
||
001877.19 |
Rear Hitch Fault, Check For Other Error Codes, Main Control Module (BLC) |
||
001877.31 |
Rear Hitch Fault, Check For Other Error Codes, Main Control Module (BLC) |
||
002000.09 |
CAN BUS Message Issue With Communication Between the Engine Module and the Main Controller. Check for Other Codes, Main Control Module (BLC) |
||
002007.09 |
CAN BUS Message Issue With Message From The PTO Module. Internal Message Issue In Main Controller, Main Control Module (BLC) |
||
002035.09 |
CAN BUS Message Issue With Message From The Hitch Controller. Internal Message Issue In Main Controller, Main Control Module (BLC) |
||
000628.02 |
There is an internal fault with the module software configuration, Main Control Module (BLC) |
||
002036.09 |
CAN BUS Message Issue With Communication Between the Front PTO Module and the Main Controller. Check for Other Codes, Main Control Module (BLC) |
||
000629.12 |
There is an internal fault with the module software configuration, Main Control Module (BLC) |
||
002049.09 |
CAN BUS Message Issue With Message From The Operator Interface Module Internal Message Issue In , Main Control Module (BLC) |
||
000630.02 |
There is an internal fault with the module software configuration, Main Control Module (BLC) |
||
002050.06 |
CAN BUS Message Issue With Communication Between the BLC Module and the , Main Control Module (BLC) |
||
000630.13 |
There is an internal fault with the module software configuration, Main Control Module (BLC) |
||
002071.09 |
CAN BUS Message Issue With Message From The CCU Module Internal Message Issue In Main Controller |
||
000920.03 |
Cab Alarm Issue, Main Control Module (BLC) |
||
000920.06 |
Cab Alarm Issue, Main Control Module (BLC) |
||
001871.09 |
CAN BUS Message Fault From Bridge module between the implement and the Main Controller on the Tractor, Main Control Module (BLC) |
||
001871.19 |
CAN Bus Message Fault From the Implement CAN BUS System, Main Control Module (BLC) |
||
001871.31 |
CAN Bus Message Fault From the Implement CAN BUS System, Main Control Module (BLC) |
||
001877.06 |
Issue With Implement Switch Amps At Module Output, Main Control Module (BLC) |
||
001877.09 |
CAN BUS Message Issue With Message From The Hitch Controller. Internal Message Issue In Main Controller, Main Control Module (BLC) |
||
002350.05 |
There is Low Amps Detected at The Headlight Low Beam Pin On The Module When The Headlights Are Turned On. Could Be A Blown Bulb Or High Resistance In A Connector., Main Control Module (BLC) |
||
002350.06 |
There is High Amps Detected at The Headlight Low Beam Pin On The Module When The Headlights Are Turned On. Could Be A Bulb Or Short Circuit To Earth |
||
002352.03 |
There is Voltage Detected at The Grab Rail Headlight Low Beam Pin On The Module When The Headlights Are Turned Off. Likely a Voltage Back Feed In The Loom. , Main Control Module (BLC) |
||
002352.05 |
There is Low Amps Detected at The Grab Rail Headlight Low Beam Pin On The Module When The Headlights Are Turned On. Could Be A Blown Bulb Or High Resistance In A Connector., Main Control Module (BLC) |
||
002352.06 |
There is High Amps Detected at The Grab Rail Headlight Low Beam Pin On The Module When The Headlights Are Turned On. Could Be A Bulb Or Short Circuit To Earth, Main Control Module (BLC) |
||
002354.03 |
There is Voltage Detected on The Bonnet Corner Work light Pin On The Module When The Work lights Are Turned Off. Likely a Voltage Back Feed In The Loom. , Main Control Module (BLC) |
||
002354.05 |
There is Low Amps Detected on The Bonnet Corner Work light Pin On The Module When The Work lights Are Turned On. Could Be A Blown Bulb Or High Resistance In A Connector., Main Control Module (BLC) |
||
002354.06 |
There is High Amps Detected on The Bonnet Corner Work light Pin On The Module When The Work lights Are Turned On. Could Be A Bulb Or A Short To Earth, Main Control Module (BLC) |
||
002358.03 |
There is Voltage Detected at The Grab Rail Headlight High Beam/Work Light Pin On The Module When The Headlights/ Work lights Are Turned Off. Likely a Voltage Back Feed In The Loom. , Main Control Module (BLC) |
||
002140.09 |
CAN BUS Message Issue With Message From The AIC Module Internal Message Issue In Main Controller, Main Control Module (BLC) |
||
002358.05 |
There is Low Amps Detected at The Grab Rail Headlight High Beam/Work Light Pin On The Module When The Lights Are Turned On. Could Be A Blown Bulb Or High Resistance In A Connector., Main Control Module (BLC) |
||
002145.09 |
CAN BUS Message Issue With Message From The FCC Module Internal Message Issue In Main Controller, Main Control Module (BLC) |
||
002358.06 |
There is High Amps Detected at The Grab Rail Headlight High Beam/Work Light Pin On The Module When The Lights Are Turned On. Could Be A Bulb Or Short Circuit To Earth, Main Control Module (BLC) |
||
002240.09 |
CAN BUS Message Issue With Message From The TEC Module Internal Message Issue In Main Controller, Main Control Module (BLC) |
||
002360.03 |
There is Voltage Detected on The Rear Mud Guard Corner Work light Pin On The Module When The Work lights Are Turned Off. Likely a Voltage Back Feed In The Loom. , Main Control Module (BLC) |
||
002348.03 |
There is Voltage Detected at The Headlight High Beam Pin On The Module When The Headlights Are Turned Off. Likely a Voltage Back Feed In The Loom, Main Control Module (BLC) |
||
002360.05 |
There is Low Amps Detected on The Rear Mud Guard Corner Work light Pin On The Module When The Work lights Are Turned On. Could Be A Blown Bulb Or High Resistance In A Connector., Main Control Module (BLC) |
||
002348.05 |
There is Low Amps Detected at The Headlight High Beam Pin On The Module When The Headlights Are Turned On. Could Be A Blown Bulb Or High Resistance In A Connector., Main Control Module (BLC) |
||
002348.06 |
There is High Amps Detected at The Headlight High Beam Pin On The Module When The Headlights Are Turned On. Could Be A Bulb Or Short Circuit To Earth, Main Control Module (BLC) |
||
002350.03 |
There is Voltage Detected at The Headlight Low Beam Pin On The Module When The Headlights Are Turned Off. Likely a Voltage Back Feed In The Loom, Main Control Module (BLC) |
||
002362.06 |
There is High Amps Detected on The Rear Roof Inner Work light Pin On The Module When The Work lights Are Turned On. Could Be A Bulb Or A Short To Earth, Main Control Module (BLC) |
||
002407.06 |
There is High Amps Detected on The Rear Roof Outer Work light Pin On The Module When The Work lights Are Turned On. Could Be A Bulb Or A Short To Earth, Main Control Module (BLC) |
||
002372.03 |
Brake Lights On Tractor High Voltage, Main Control Module (BLC) |
||
002372.05 |
Brake Lights On Tractor Low Amp Draw, Main Control Module (BLC) Cab Module (CLC) |
||
002372.06 |
Brake Lights On Tractor High Amp Draw, Main Control Module (BLC) |
||
002382.03 |
There is Voltage Detected on The Side Light/Park Light Pin On The Module When The lights Are Turned Off. Likely a Voltage Back Feed In The Loom. , Main Control Module (BLC) |
||
002382.05 |
There is Low Amps Detected on The Side Light/Park Light Pin On The Module When The Work lights Are Turned On. Could Be A Blown Bulb Or High Resistance In A Connector., Main Control Module (BLC) |
||
002382.06 |
There is High Amps Detected on The Side Light/Park Light Pin On The Module When The Work lights Are Turned On. Could Be A Bulb Or A Short To Earth |
||
002396.03 |
There is Voltage Detected on The Front Roof Inner Work light Pin On The Module When The Work lights Are Turned Off. Likely a Voltage Back Feed In The Loom. , Main Control Module (BLC) |
||
002396.05 |
There is Low Amps Detected on The Front Roof Inner Work light Pin On The Module When The Work lights Are Turned On. Could Be A Blown Bulb Or High Resistance In A Connector., Main Control Module (BLC) |
||
002396.06 |
There is High Amps Detected on The Front Roof Inner Work light Pin On The Module When The Work lights Are Turned On. Could Be A Bulb Or A Short To Earth, Main Control Module (BLC) |
||
002398.03 |
There is Voltage Detected on The Front Roof Outer Work light Pin On The Module When The Work lights Are Turned Off. Likely a Voltage Back Feed In The Loom. , Main Control Module (BLC) |
||
002398.05 |
There is Low Amps Detected on The Front Roof Outer Work light Pin On The Module When The Work lights Are Turned On. Could Be A Blown Bulb Or High Resistance In A Connector., Main Control Module (BLC) |
||
002398.06 |
There is High Amps Detected on The Front Roof Outer Work light Pin On The Module When The Work lights Are Turned On. Could Be A Bulb Or A Short To Earth, Main Control Module (BLC) |
||
002360.06 |
There is High Amps Detected on The Rear Mud Guard Corner Work light Pin On The Module When The Work lights Are Turned On. Could Be A Bulb Or Short To Earth, Main Control Module (BLC) |
||
002407.03 |
There is Voltage Detected on The Rear Roof Outer Work light Pin On The Module When The Work lights Are Turned Off. Likely a Voltage Back Feed In The Loom. , Main Control Module (BLC) |
||
002362.03 |
There is Voltage Detected on The Rear Roof Inner Work light Pin On The Module When The Work lights Are Turned Off. Likely a Voltage Back Feed In The Loom. , Main Control Module (BLC) |
||
002407.05 |
There is Low Amps Detected on The Rear Roof Outer Work light Pin On The Module When The Work lights Are Turned On. Could Be A Blown Bulb Or High Resistance In A Connector., Main Control Module (BLC) |
||
002362.05 |
There is Low Amps Detected on The Rear Roof Inner Work light Pin On The Module When The Work lights Are Turned On. Could Be A Blown Bulb Or High Resistance In A Connector., Main Control Module (BLC) |
||
522876.19 |
CAN BUS Message Fault From the implement and the Main Controller on the Tractor |
||
000177.09 |
CAN BUS Message Issue, Check For Other Error Codes Main Control Module (CCU) |
||
524259.00 |
Module Over heating. If the module is not hot it could be an internal issue with the module |
||
000177.16 |
Transmission Oil Temp is High Main Control Module (CCU) |
||
524259.15 |
Module Over heating. If the module is not hot it could be an internal issue with the module |
||
000177.19 |
Trans Temp Sensor Fault, Check For Other Codes Main Control Module (CCU) |
||
524259.16 |
Module Over heating. If the module is not hot it could be an internal issue with the module |
||
000177.31 |
Trans Temp Sensor Fault, Check For Other Codes Main Control Module (CCU) |
||
000084.04 |
Wheel Speed Sensor Voltage Issue Low Voltage Main Control Module (CCU) |
||
000190.09 |
CAN BUS Message Missing On The Power Train CAN BUS, Missing Messages From The Engine Module Main Control Module (CCU) |
||
000084.05 |
Wheel Speed Sensor Open Circuit Low Amps Main Control Module (CCU) |
||
000096.03 |
Fuel tank level sensor signal issue High Voltage Main Control Module (CCU) |
||
000096.04 |
Fuel tank level sensor signal issue Low Voltage Main Control Module (CCU) |
||
000096.17 |
Fuel tank fuel level is low Main Control Module (CCU) |
||
000126.16 |
Transmission Oil Filter Blocked Main Control Module (CCU) |
||
000158.03 |
The module has detected a high Ignition Supply Main Control Module (CCU) |
||
000158.04 |
The module has detected a low Ignition Supply Main Control Module (CCU) |
||
000168.04 |
Voltage to module is low Main Control Module (CCU) |
||
000177.00 |
The Transmission Oil Temp Is High Main Control Module (CCU) |
||
000177.03 |
Trans Oil Temp Voltage High Main Control Module (CCU) |
||
000177.04 |
Trans Oil Temp Voltage Low Main Control Module (CCU) |
||
000247.31 |
CAN BUS Message Missing On The Power Train CAN BUS, Missing Messages From The Engine Module Main Control Module (CCU) |
||
000569.03 |
High Voltage On Diff Lock Solenoid Main Control Module (CCU) |
||
000569.06 |
High Amps On Diff Lock Solenoid Main Control Module (CCU) |
||
000628.02 |
Internal Issue With Module, Restart Tractor and Check For Other Codes, Suspect Failed Module Main Control Module (CCU) |
||
000628.12 |
Internal Issue With Module, Restart Tractor and Check For Other Codes, Suspect Failed Module Main Control Module (CCU) |
||
000190.19 |
CAN BUS Message Missing On The Power Train CAN BUS, Missing Messages From The Engine Module Engine Speed Main Control Module (CCU) |
||
000629.12 |
Internal Issue With Module, Restart Tractor and Check For Other Codes, Suspect Failed Module Main Control Module (CCU) |
||
000190.31 |
CAN BUS Message Missing On The Power Train CAN BUS, Missing Messages From The Engine Module Engine Speed Fault Main Control Module (CCU) |
||
000630.14 |
There is an internal fault with the module software configuration Main Control Module (CCU) |
||
000191.09 |
CAN BUS Message Missing On The Power Train CAN BUS, Missing Messages Transmission Speed |
||
000639.12 |
Vehicle CAN BUS Fault Main Control Module (CCU) |
||
000191.19 |
CAN BUS Message Missing On The Power Train CAN BUS, Missing Messages Transmission Speed |
||
000639.14 |
Vehicle CAN BUS Fault Main Control Module (CCU) |
||
000191.31 |
CAN BUS Message Missing On The Power Train CAN BUS, Missing Messages Transmission Speed |
||
000237.02 |
Module Tractor Serial Number Miss Match Detected Main Control Module (CCU) |
||
000237.12 |
Module Tractor Serial Number Miss Match Detected Main Control Module (CCU) |
||
000237.14 |
Module Tractor Serial Number Miss Match Detected Main Control Module (CCU) |
||
000237.31 |
Module Tractor Serial Number Miss Match Detected Main Control Module (CCU) |
||
000247.09 |
CAN BUS Message Missing On The Power Train CAN BUS, Missing Messages From The Engine Module Main Control Module (CCU) |
||
000247.19 |
CAN BUS Message Missing On The Power Train CAN BUS, Missing Messages From The Engine Module Main Control Module (CCU) |
||
001231.14 |
ISO BUS CAN BUS Fault Main Control Module (CCU) |
||
001713.02 |
Hydraulic Filter Blocked. Generated By Filter Pressure Differential Sensor Main Control Module (CCU) |
||
001713.15 |
Hydraulic Filter Blocked. Generated By Filter Pressure Differential Sensor Main Control Module (CCU) |
||
001713.16 |
Hydraulic Filter Blocked. Generated By Filter Pressure Differential Sensor Main Control Module (CCU) |
||
001865.09 |
CAN BUS Message Fault Main Control Module (CCU) |
||
001865.19 |
CAN BUS Message Fault Main Control Module (CCU) |
||
002000.09 |
CAN BUS Message Issue With Communication Between the Modules. Check for Other Codes Main Control Module (CCU) |
||
002003.09 |
CAN BUS Message Fault Main Control Module (CCU) |
||
002005.09 |
CAN BUS Message Fault Main Control Module (CCU) |
||
000746.31 |
Issue With Diff Lock Solenoid |
||
002019.09 |
CAN BUS Message Fault Main Control Module (CCU) |
||
000959.09 |
Vehicle CAN BUS Fault Main Control Module (CCU) |
||
002049.09 |
CAN BUS Message Fault Main Control Module (CCU) |
||
001058.03 |
High Voltage On Air Brake Pressure Switch Main Control Module (CCU) |
||
002139.09 |
CAN BUS Message Fault Main Control Module (CCU) |
||
001058.04 |
Low Voltage On Air Brake Pressure Switch Main Control Module (CCU) |
||
002145.09 |
CAN BUS Message Fault Main Control Module (CCU) |
||
001058.16 |
Air Brake Pressure Too High Or Failed Sensor Main Control Module (CCU) |
||
001058.18 |
Air Brake Pressure Too Low Or Failed Sensor Main Control Module (CCU) |
||
001231.12 |
ISO BUS CAN BUS Fault Main Control Module (CCU) |
||
003353.15 |
Alternator Fault. Over Heating, Turn Off Some Lights. Main Control Module (CCU) |
||
522451.02 |
Front Axle Steering Angle Position Sensor Signals Out Of Range Main Control Module (CCU) |
||
003510.03 |
Issue With 5 Volt Sensor Supply High Voltage, Main Control Module (CCU) |
||
003510.04 |
Issue With 5 Volt Sensor Supply Low Voltage, Main Control Module (CCU) |
||
003510.06 |
Issue With 5 Volt Sensor Supply |
||
003597.03 |
12 Volt Supply Voltage is High Main Control Module (CCU) |
||
003597.06 |
12 Volt Supply High AMPS Main Control Module (CCU) |
||
005016.06 |
12 Volt Supply High Main Control Module (CCU) |
||
516123.09 |
LIN BUS Communication Issue With Battery Cut Off Relay Main Control Module (CCU) |
||
516123.14 |
LIN BUS Communication Issue With Battery Cut Off Relay Main Control Module (CCU) |
||
516123.31 |
LIN BUS Communication Issue With Battery Cut Off Relay Main Control Module (CCU) |
||
520425.07 |
CAN BUS Message Issue Main Controller Main Control Module (CCU) |
||
520426.07 |
CAN BUS Message Issue Main Controller Main Control Module (CCU) |
||
520542.03 |
CAN BUS Voltage High, Main Control Module (CCU) |
Search all 14,929 tractor error codes
