Providing technical information to assist with quick fault code diagnosis. This tool is invaluable for dealer technicians, mechanics and farmers.
Search all 14,929 tractor error codes
Enter your error code and use the Tractor "Make" and "Model" to narrow down your search results
Hear from our happy customers
Client satisfaction is at the heart of what we do. Hear directly from those who have experienced our commitment to quality and service.
Detailed information available
| Error Code | Description | Technical Documentation | Make & Models |
|---|---|---|---|
000097.03 |
Water In Fuel Sensor Out Of Range (ECU) |
||
000097.04 |
Water In Fuel Sensor Out Of Range (ECU) |
||
523834.13 |
The Signal Voltage From The Rear Hitch Height Control Slide is out of range Main Control Module (HCU) |
||
000097.16 |
Water In Fuel Detected, Drain Fuel Filters. If There is A lot of Water Replace Filters and Check Fuel Tank (ECU) |
||
523842.03 |
Rear Hitch Draft Control Dial High Voltage Issue Main Control Module (HCU) |
||
000100.01 |
Engine Oil Pressure Sensor Signal Is Low (ECU) |
||
523842.04 |
Rear Hitch Draft Control Dial Low Voltage Issue Main Control Module (HCU) |
||
000100.04 |
Engine Oil Pressure Sensor Signal Is Low (ECU) |
||
523843.02 |
Rear Hitch Cab Raise/ Lower Switch Out Of Range Main Control Module (HCU) |
||
000105.00 |
The Intake Manifold Air Temp Sensor Is High (ECU) |
||
523910.02 |
Internal Issue Detected In Module, Main Control Module (HCU) |
||
523950.13 |
Rear Hitch Position Sensor Out Of Range Main Control Module (HCU) |
||
000029.03 |
Hand Throttle Signal Voltage Issue (ECU) |
||
000029.04 |
Hand Throttle Signal Voltage Issue (ECU) |
||
000091.03 |
Foot Throttle Signal Voltage Issue (ECU) |
||
000091.04 |
Foot Throttle Signal Voltage Issue (ECU) |
||
000094.03 |
Low Pressure Fuel Sensor Voltage Too High (ECU) |
||
000094.04 |
Low Pressure Fuel Sensor Voltage Too Low (ECU) |
||
000094.17 |
Low Pressure Fuel Sensor Voltage Low (ECU) |
||
000110.16 |
Engine Coolant Temp High (ECU) |
||
000157.03 |
The Fuel Rail Pressure Sensor Signal Voltage Is Too High (ECU) |
||
000157.04 |
The Fuel Rail Pressure Sensor Signal Voltage Is Too Low (ECU) |
||
000157.10 |
The Fuel Rail Pressure Sensor Signal Voltage Is Erratic (ECU) |
||
000157.17 |
The Fuel Rail Pressure Sensor Signal Voltage Is Low (ECU) |
||
000158.12 |
The Engine ECU Has An Internal Issue. Module Did Not Power Down Correctly. Check Battery And Ignition Supplies To Module (ECU) |
||
000174.00 |
Fuel Temperature High (ECU) |
||
000105.03 |
The Intake Manifold Air Temp Sensor High Voltage (ECU) |
||
000174.03 |
Fuel Temperature High Signal Voltage (ECU) |
||
000105.04 |
The Intake Manifold Air Temp Sensor Low Voltage (ECU) |
||
000174.04 |
Fuel Temperature Low Signal Voltage (ECU) |
||
000105.15 |
The Intake Manifold Air Temp Sensor Is High (ECU) |
||
000174.16 |
Fuel Temperature High (ECU) |
||
000105.16 |
The Intake Manifold Air Temp Sensor Is High (ECU) |
||
000611.03 |
There Is A Problem With The Supply Voltage To Injectors (ECU) |
||
000108.02 |
The Signal From The Internal Barometric Sensor Is Faulty (ECU) |
||
000110.00 |
Engine Coolant Temp High (ECU) |
||
000110.03 |
Engine Coolant Temp (ECU) |
||
000110.04 |
Engine Coolant Temp (ECU) |
||
000110.15 |
Engine Coolant Temp High (ECU) |
||
000636.05 |
Issue With Signal From Camshaft Position Sensor High Resistance (ECU) |
||
000636.06 |
Issue With Signal From Camshaft Position Sensor Low Resistance (ECU) |
||
000636.08 |
Issue With Signal From Camshaft Position Sensor Missing (ECU) |
||
000636.10 |
Issue With Signal From Camshaft Position Sensor (ECU) |
||
000637.02 |
Issue With Signal From Crankshaft Position Sensor (ECU) |
||
000637.05 |
Issue With Signal From Crankshaft Position Sensor High Resistance (ECU) |
||
000637.06 |
Issue With Signal From Crankshaft Position Sensor Low Resistance (ECU) |
||
000637.07 |
Issue With Signal From Crankshaft Position Sensor (ECU) |
||
000637.08 |
Issue With Signal From Crankshaft Position Sensor Missing (ECU) |
||
000637.10 |
Issue With Signal From Crankshaft Position Sensor (ECU) |
||
000651.02 |
Injector Number 1 Code Error (ECU) |
||
000611.04 |
There Is A Problem With The Supply Voltage To Injectors (ECU) |
||
000651.05 |
Injector Number 1 High Resistance Error (ECU) |
||
000629.02 |
Internal Issue With Module, Restart Tractor and Check For Other Codes, Suspect Failed Module (ECU) |
||
000651.06 |
Injector Number 1 Low Resistance Error (ECU) |
||
000629.12 |
Internal Issue With Module, Restart Tractor and Check For Other Codes, Suspect Failed Module (ECU) |
||
000651.13 |
Injector Number 1 Calibration Code Error (ECU) |
||
000629.13 |
Internal Issue With Module, Restart Tractor and Check For Other Codes, Suspect Failed Module (ECU) |
||
000652.02 |
Injector Number 2 Code Error (ECU) |
||
000636.02 |
Issue With Signal From Camshaft Position Sensor High Resistance (ECU) |
||
000652.06 |
Injector Number 2 Low Resistance Error (ECU) |
||
001347.07 |
Fuel Rail Pressure Issue (ECU) |
||
000652.13 |
Injector Number 2 Calibration Code Error (ECU) |
||
001569.31 |
The Engine Is In An Active Derate Mode, Check For Other Error Codes (ECU) |
||
000653.02 |
Injector Number 3 Code Error (ECU) |
||
002003.09 |
CAN BUS Message Issue With Communication Between the Engine Module and the Main Controller. Check for Other Codes |
||
000653.05 |
Injector Number 3 High Resistance Error (ECU) |
||
000653.06 |
Injector Number 3 Low Resistance Error (ECU) |
||
000653.13 |
Injector Number 3 Calibration Code Error (ECU) |
||
000654.02 |
Injector Number 4 Code Error (ECU) |
||
000654.05 |
Injector Number 4 High Resistance Error (ECU) |
||
000654.06 |
Injector Number 4 Low Resistance Error (ECU) |
||
000654.13 |
Injector Number 4 Calibration Code Error (ECU) |
||
000676.03 |
Cold Start Relay Signal When Relay Should Be Off (ECU) |
||
000676.05 |
No Cold Start Relay Signal When Relay Should Be On (ECU) |
||
001136.00 |
Engine ECU Over Heating (ECU) |
||
001136.16 |
Engine ECU Internal Temperature Reading Fault (ECU) |
||
001347.03 |
Fuel Suction Valve Low Resistance Issue (ECU) |
||
000652.05 |
Injector Number 2 High Resistance Error (ECU) |
||
001347.05 |
Fuel Suction Valve High Resistance Issue (ECU) |
||
003509.03 |
The Sensor Supply 5 Volt Voltage Is High Engine Module (ECU) |
||
003509.04 |
The Sensor Supply 5 Volt Voltage Is Low Engine Module (ECU) |
||
003510.03 |
The Sensor Supply 5 Volt Voltage Is High Engine Module (ECU) |
||
003510.04 |
The Sensor Supply 5 Volt Voltage Is Low Engine Module (ECU) |
||
003511.03 |
Sensor Supply High Voltage Foot Throttle Position Sensor (ECU) |
||
003511.04 |
Sensor Supply Low Voltage Foot Throttle Position Sensor (ECU) |
||
003597.18 |
Engine Module Battery Voltage Supply Low (ECU) |
||
000110.04 |
Engine Coolant Temp Sensor Issue (CCU) |
||
000110.16 |
Engine Coolant Temp High (CCU) |
||
000237.02 |
Central Control Module Has Noted An issue With The Stored Tractor Configuration Data (CCU) |
||
000237.31 |
Central Control Module Has Noted An issue With The Stored Tractor Configuration Data (CCU) |
||
000567.05 |
Main Control Module Has Noted An Issue With The Voltage On The 4WD Circuit. (CCU) |
||
000569.05 |
Issue With Diff Lock Solenoid Circuit (CCU) |
||
000628.02 |
Central Control Module Has Noted An issue With The Stored Tractor Configuration Data (CCU) |
||
000630.14 |
Central Control Module Has Noted An issue With The Rear PTO Speed (CCU) |
||
001638.00 |
Transmission Hydraulic Oil Temperature Is Very High (CCU) |
||
001638.03 |
Transmission Hydraulic Oil Temperature Sensor High Voltage (CCU) |
||
000096.03 |
Fuel level Sender High Voltage (CCU) |
||
001638.04 |
Transmission Hydraulic Oil Temperature Sensor low Voltage (CCU) |
||
000096.04 |
Fuel level Sender Low Voltage (CCU) |
||
001638.16 |
Transmission Hydraulic Oil Temperature Is High (CCU) |
||
000100.01 |
Engine Oil Pressure Low (CCU) |
||
001883.00 |
Central Control Module Has Noted An issue With The Rear PTO Over Speed (CCU) |
||
000100.04 |
Engine Oil Pressure Sensor Voltage Low (CCU) |
||
001883.01 |
Central Control Module Has Noted An issue With The Rear PTO Low Speed (CCU) |
||
000110.00 |
Engine Coolant Temp High (CCU) |
||
000110.03 |
Engine Coolant Temp Sensor Issue (CCU) |
||
002931.02 |
Foot Brake Oil Level Switch Voltage Issue, Check Brake Circuit. (CCU) |
||
002000.09 |
Main Control Module Has Noted There Is Missing CAN BUS information From The Engine Module. (EIC) |
||
002931.03 |
Foot Brake Oil Level Switch High Volts, Check Brake Circuit. (CCU) |
||
003695.14 |
The Calculated Soot Loading In The DPF Is High, However The Regen Switch Is Turned Off. Ensure The Switch Is In Auto Position (ECU) |
||
002931.04 |
Foot Brake Oil Level Switch Low Volts, Check Brake Circuit. (CCU) |
||
003032.02 |
Right Brake Pedal Switch Voltage Issue, (CCU) |
||
003033.02 |
Left Brake Pedal Switch Voltage Issue, (CCU) |
||
003509.03 |
Central Control Module Has Noted A High Voltage On The 5 volt Sensor Supply Circuit. (CCU) |
||
003509.04 |
Central Control Module Has Noted A Low Voltage On The 5 volt Sensor Supply Circuit. (CCU) |
||
523316.04 |
Central Control Module Has Noted An Issue With The Ignition Supply Voltage. (CCU) |
||
523844.12 |
Main Control Module Has Noted An Issue With The Voltage On The 4WD Switch Circuit. (CCU) |
||
524037.02 |
Main Control Module Has Noted An Issue With The Voltage On The 4WD Circuit. (CCU) |
||
524223.03 |
Main Control Module Has Noted The Diff Lock Button Has Been Pressed For Too Long (CCU) |
||
524224.14 |
Main Control Module Has Noted An Issue With The Signal From The PTO Switch. (CCU) |
||
524235.05 |
Main Control Module Has Noted An Issue With The Voltage On The 4WD Circuit. (CCU) |
||
524252.05 |
Main Control Module Has Noted An Issue With The Voltage On The PTO Circuit. (CCU) |
||
002818.31 |
Operator Seat Switch Not Activated With The PTO Switched On (CCU) |
||
000628.02 |
Main Control Module Has Noted An Internal Issue When Booting Up. (EIC) |
||
002931.01 |
Foot Brake Oil Level Switch Activated, Check Brake Circuit. (CCU) |
||
000628.13 |
Main Control Module Has Noted An Internal Issue When Booting Up. (EIC) |
||
002368.06 |
Dash Module Has Noted A High Amp Draw On The Left Turn Signal Circuit. (ICC) |
||
002370.05 |
Dash Module Has Noted A Low Amp Draw On The Right Turn Signal Circuit. (ICC) |
||
003719.15 |
The Calculated Soot Loading In The DPF Is High, However The Regen Switch Is Turned Off. Ensure The Switch Is In Auto Position (ECU) |
||
002370.06 |
Dash Module Has Noted A High Amp Draw On The Right Turn Signal Circuit. (ICC) |
||
523702.14 |
Main Control Module Has Noted An Internal Issue When Booting Up. (EIC) |
||
002876.02 |
Dash Module Has Noted An Issue With The Input Signals From The Indicator Switch (ICC) |
||
523702.31 |
Main Control Module Has Noted An Internal Issue When Booting Up. (EIC) |
||
003695.02 |
Dash Module Has Noted An Issue With The Signal Voltage From The DPF Filter Switch (ICC) |
||
000237.02 |
Dash Module Has Noted An issue With The Stored Tractor Configuration Data (ICC) |
||
003696.02 |
Dash Module Has Noted An Issue With The Signal Voltage From The DPF Filter Switch (ICC) |
||
000237.31 |
Dash Module Has Noted An issue With The Stored Tractor Configuration Data (ICC) |
||
000628.12 |
Dash Module Has Noted An Internal Issue When Booting Up. (ICC) |
||
000630.02 |
Dash Module Has Noted An Internal Issue When Booting Up. (ICC) |
||
000630.11 |
Dash Module Has Noted An Internal Issue When Booting Up. (ICC) |
||
000920.06 |
Dash Module Has Noted An Issue With The Dash Audible Alarm Circuit (ICC) |
||
002000.09 |
CAN BUS Message Issue With Communication Between the Engine Module and the Dash Module. Check for Other Codes (ICC) |
||
002003.09 |
CAN BUS Message Issue With Communication Between the Dash Module And The Main Control Module PTR. Check for Other Codes (ICC) |
||
002023.06 |
Dash Module Has Noted AN Issue With High Amp Draw Through The Module. (ICC) |
||
002071.09 |
CAN BUS Message Issue With Communication Between the Dash Module And The Main Control Module CCU. Check for Other Codes (ICC) |
||
002368.05 |
Dash Module Has Noted A Low Amp Draw On The Left Turn Signal Circuit. (ICC) |
||
000630.14 |
Main Control Module Has Noted An Issue With The Transmission Calibration Values. (PTR) |
||
000752.03 |
Main Control Module Has Noted An Issue With The Shuttle Manual Sensitivity Adjustment Dial Voltage. (PTR) |
||
000752.04 |
Main Control Module Has Noted An Issue With The Shuttle Manual Sensitivity Adjustment Dial Voltage. (PTR) |
||
001504.10 |
Main Control Module Has Noted An Issue With The Driver Present Seat Switch. (PTR) |
Search all 14,929 tractor error codes
