Providing technical information to assist with quick fault code diagnosis. This tool is invaluable for dealer technicians, mechanics and farmers.
Search all 14,929 tractor error codes
Enter your error code and use the Tractor "Make" and "Model" to narrow down your search results
Hear from our happy customers
Client satisfaction is at the heart of what we do. Hear directly from those who have experienced our commitment to quality and service.
Detailed information available
| Error Code | Description | Technical Documentation | Make & Models |
|---|---|---|---|
000628.02 |
main Control Module Has Noted An Internal Issue When Booting Up. (PTR) |
||
000630.14 |
Main Control Module Has Noted An Issue With The Transmission Calibration Values. (PTR) |
||
000167.04 |
Dash Module Has Noted A Low Battery/Alternator Voltage. (ICC) |
||
000752.03 |
Main Control Module Has Noted An Issue With The Shuttle Manual Sensitivity Adjustment Dial Voltage. (PTR) |
||
000237.02 |
Dash Module Has Noted An issue With The Stored Tractor Configuration Data (ICC) |
||
000752.04 |
Main Control Module Has Noted An Issue With The Shuttle Manual Sensitivity Adjustment Dial Voltage. (PTR) |
||
000237.31 |
Dash Module Has Noted An issue With The Stored Tractor Configuration Data (ICC) |
||
001504.10 |
Main Control Module Has Noted An Issue With The Driver Present Seat Switch. (PTR) |
||
000628.12 |
Dash Module Has Noted An Internal Issue When Booting Up. (ICC) |
||
002820.31 |
Operator Seat Switch Not Activated With The Shuttle Lever Is Switched On (PTR) |
||
002825.07 |
Main Control Module Has Noted An Issue With The Park Brake Active When But The Shuttle Lever Is Not In Neutral. (PTR) |
||
524234.04 |
Main Control Module Has Noted An Issue With The Enable Trans Pressure Sensor. (PTR) |
||
003509.03 |
Main Control Module Has Noted An issue With 5 Volt Sensor Supply Voltage. (PTR) |
||
524254.03 |
Main Control Module Has Noted An Issue With The Voltage From The Transmission Enable Solenoid. (PTR) |
||
003509.04 |
Main Control Module Has Noted An issue With 5 Volt Sensor Supply Voltage. (PTR) |
||
524254.04 |
Main Control Module Has Noted An Issue With The Voltage From The Transmission Enable Solenoid. (PTR) |
||
523953.02 |
Main Control Module Has Noted An Issue With The Signals From The Neutral Switch On The Transmission, High/Low Gear Shift Buttons, Park Lock Switch, Shuttle Lever Neutral Signal. (PTR) |
||
524267.15 |
Main Control Module Has Noted That A Forward/ Reverse Shuttle Was Done At A High Travel Speed. (PTR) |
||
524020.31 |
Main Control Module Has Noted The Shuttle Lever Was Not In Neutral When Tractor Was Turned On. (PTR) |
||
524021.31 |
Main Control Module Has Noted The Shuttle Lever Reverse Signal Issue. (PTR) |
||
524160.02 |
Main Control Module Has Noted An Issue With The Signal Voltages From The Shuttle Lever (PTR) |
||
524173.02 |
Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR) |
||
524173.14 |
Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR) |
||
524173.15 |
Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR) |
||
524173.16 |
Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR) |
||
524173.17 |
Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR) |
||
524173.18 |
Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR) |
||
524230.05 |
Main Control Module Has Noted An Issue With The Supply Voltage To The Enable Trans Pressure Solenoid. (PTR) |
||
524230.07 |
Main Control Module Has Noted An Issue With The Enable Trans Pressure. (PTR) |
||
524234.03 |
Main Control Module Has Noted An Issue With The Enable Trans Pressure Sensor. (PTR) |
||
000676.05 |
Cold Start Relay Is Not Supplying Voltage When It Should Be Turned On. (CCU) |
||
001638.00 |
Transmission Hydraulic Oil Temperature Is Very High (CCU) |
||
001638.03 |
Transmission Hydraulic Oil Temperature Sensor High Voltage (CCU) |
||
001638.04 |
Transmission Hydraulic Oil Temperature Sensor low Voltage (CCU) |
||
000100.01 |
Engine Oil Pressure Sensor Signal Is Low (CCU) |
||
001638.16 |
Transmission Hydraulic Oil Temperature Is High (CCU) |
||
000100.04 |
Engine Oil Pressure Sensor Signal Is Low (CCU) |
||
001883.00 |
Central Control Module Has Noted An issue With The Rear PTO Over Speed (CCU) |
||
000110.00 |
Engine Coolant Temp High (CCU) |
||
001883.01 |
Central Control Module Has Noted An issue With The Rear PTO Low Speed (CCU) |
||
000110.03 |
Engine Coolant Temp Sensor Signal Voltage High (CCU) |
||
002818.31 |
Operator Seat Switch Not Activated With The PTO Switched On (CCU) |
||
000110.04 |
Engine Coolant Temp Sensor Signal Voltage Low (CCU) |
||
000110.16 |
Engine Coolant Temp High (CCU) |
||
000237.02 |
Central Control Module Has Noted An issue With The Stored Tractor Configuration Data (CCU) |
||
000237.31 |
Central Control Module Has Noted An issue With The Stored Tractor Configuration Data (CCU) |
||
000569.05 |
Issue With Diff Lock Solenoid Circuit (CCU) |
||
000628.02 |
Central Control Module Has Noted An issue With The Stored Tractor Configuration Data (CCU) |
||
000630.14 |
Central Control Module Has Noted An issue With The Rear PTO Speed (CCU) |
||
000676.03 |
Cold Start Relay Is Supplying Voltage When It Should Be Turned Off. (CCU) |
||
000628.02 |
Main Control Module Has Noted An Internal Issue When Booting Up. (EIC) |
||
000628.12 |
Main Control Module Has Noted An Internal Issue When Booting Up. (EIC) |
||
000628.13 |
Main Control Module Has Noted An Internal Issue When Booting Up. (EIC) |
||
002000.09 |
Main Control Module Has Noted There Is Missing CAN BUS information From The Engine Module. (EIC) |
||
003695.14 |
The Calculated Soot Loading In The DPF Is High, However The Regen Switch Is Turned Off. Ensure The Switch Is In Auto Position (ECU) |
||
003719.15 |
The Calculated Soot Loading In The DPF Is High, However The Regen Switch Is Turned Off. Ensure The Switch Is In Auto Position (ECU) |
||
523702.14 |
Main Control Module Has Noted An Internal Issue When Booting Up. (EIC) |
||
523702.31 |
Main Control Module Has Noted An Internal Issue When Booting Up. (EIC) |
||
003509.03 |
Central Control Module Has Noted A High Voltage On The 5 volt Sensor Supply Circuit. (CCU) |
||
000107.00 |
Dash Module Has Noted An Issue With The Engine Air Filter Blocked. (ICC) |
||
003509.04 |
Central Control Module Has Noted A Low Voltage On The 5 volt Sensor Supply Circuit. (CCU) |
||
000167.04 |
Dash Module Has Noted A Low Battery/Alternator Voltage. (ICC) |
||
524016.04 |
Central Control Module Has Noted An Issue With The Ignition Supply Voltage. (CCU) |
||
000237.02 |
Dash Module Has Noted An issue With The Stored Tractor Configuration Data (ICC) |
||
524037.02 |
Main Control Module Has Noted An Issue With The Voltage On The 4WD Circuit. (CCU) |
||
000237.31 |
Dash Module Has Noted An issue With The Stored Tractor Configuration Data (ICC) |
||
524223.03 |
Main Control Module Has Noted The Diff Lock Button Has Been Pressed For Too Long (CCU) |
||
524224.14 |
Main Control Module Has Noted An Issue With The Signal From The PTO Switch. PTO Switch On Signal Received When Tractor Was Started. (CCU) |
||
524235.05 |
Main Control Module Has Noted An Issue With The Voltage On The 4WD Circuit. (CCU) |
||
524252.05 |
Main Control Module Has Noted An Issue With The Voltage On The PTO Circuit. (CCU) |
||
000162.02 |
Main Control Module Has Noted An Issue With The Signal Voltage From The Transmission Hi/Low Switch. (PTR) |
||
000162.31 |
Main Control Module Has Noted An Issue With The Signal Voltage From The Transmission Hi/Low Switch. (PTR) |
||
000190.18 |
Main Control Module Has Noted The Engine Speed Has Not Been Received On The CAN BUS From The Engine Module. (PTR) |
||
000191.00 |
Main Control Module Has Noted The Transmission Speed Sensor Speed Is Too High During Calibration (PTR) |
||
000191.17 |
Main Control Module Has Noted The Transmission Speed Sensor Speed Is Too Low During Calibration (PTR) |
||
000598.02 |
Main Control Module Has Noted An Issue With The Clutch Pedal Sensor. (PTR) |
||
000598.04 |
Main Control Module Has Noted An Issue With The Clutch Pedal Sensor. (PTR) |
||
000628.02 |
Main Control Module Has Noted An Internal Issue When Booting Up. (PTR) |
||
000629.12 |
Main Control Module Has Noted An Internal Issue When Booting Up. (PTR) |
||
000630.14 |
Main Control Module Has Noted An Issue With The Transmission Calibration Values. (PTR) |
||
000734.05 |
Main Control Module Has Noted An Issue With The Supply Voltage To The Low Forward Clutch Solenoid. (PTR) |
||
000735.05 |
Main Control Module Has Noted An Issue With The Supply Voltage To The Reverse Clutch Solenoid. (PTR) |
||
000628.12 |
Dash Module Has Noted An Internal Issue When Booting Up. (ICC) |
||
000736.05 |
Main Control Module Has Noted An Issue With The Supply Voltage To The High Forward Clutch Solenoid. (PTR) |
||
000630.02 |
Dash Module Has Noted An Internal Issue When Booting Up. (ICC) |
||
000752.03 |
Main Control Module Has Noted An Issue With The Shuttle Manual Sensitivity Adjustment Dial Voltage. (PTR) |
||
000084.07 |
Main Control Module Has Noted A Wheel Speed During A Transmission Calibration. (PTR) |
||
000752.04 |
Main Control Module Has Noted An Issue With The Shuttle Manual Sensitivity Adjustment Dial Voltage. (PTR) |
||
000158.01 |
Main Control Module Has Noted A Low Module Switched 12 volt Supply Voltage. (PTR) |
||
001504.10 |
Main Control Module Has Noted An Issue With The Driver Present Seat Switch. (PTR) |
||
002820.31 |
Operator Seat Switch Not Activated With The Shuttle Lever Is Switched On (PTR) |
||
524173.17 |
Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR) |
||
002825.07 |
Main Control Module Has Noted An Issue With The Park Brake Active When But The Shuttle Lever Is Not In Neutral. (PTR) |
||
524173.18 |
Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR) |
||
003509.03 |
Main Control Module Has Noted An issue With 5 Volt Sensor Supply Voltage. (PTR) |
||
524230.05 |
Main Control Module Has Noted An Issue With The Supply Voltage To The Enable Trans Pressure Solenoid. (PTR) |
||
003509.04 |
Main Control Module Has Noted An issue With 5 Volt Sensor Supply Voltage. (PTR) |
||
524230.07 |
Main Control Module Has Noted An Issue With The Enable Trans Pressure. (PTR) |
||
522454.03 |
Main Control Module Has Noted An Issue With The Signal Voltage From The Creep Position Sensor. (PTR) |
||
522454.04 |
Main Control Module Has Noted An Issue With The Signal Voltage From The Creep Position Sensor. (PTR) |
||
522456.31 |
Main Control Module Has Noted The Operator Has Changed Gear On The Manual Gearbox Without Using The Clutch. (PTR) |
||
523953.02 |
Main Control Module Has Noted An Issue With The Signals From The Neutral Switch On The Transmission, High/Low Gear Shift Buttons, Park Lock Switch, Shuttle Lever Neutral Signal. (PTR) |
||
523966.31 |
Main Control Module Has Noted The COME HOME Fuse Is Fitted. (PTR) |
||
524020.31 |
Main Control Module Has Noted The Shuttle Lever Was Not In Neutral When Tractor Was Turned On. (PTR) |
||
524021.31 |
Main Control Module Has Noted The Shuttle Lever Reverse Signal Issue. (PTR) |
||
524160.02 |
Main Control Module Has Noted An Issue With The Signal Voltages From The Shuttle Lever (PTR) |
||
524173.02 |
Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR) |
||
524173.14 |
Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR) |
||
524173.15 |
Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR) |
||
524173.16 |
Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR) |
||
001873.11 |
Rear Hitch Position Sensor Voltage Out Of Range, Main Control Module (HCU) |
||
001873.13 |
Rear Hitch Calibration Issue, Main Control Module (HCU) |
||
001881.03 |
Draft Pin Sensor Signal Voltage High, Main Control Module (HCU) |
||
001881.04 |
Draft Pin Sensor Signal Voltage Low, Main Control Module (HCU) |
||
524234.03 |
Main Control Module Has Noted An Issue With The Enable Trans Pressure Sensor. (PTR) |
||
001881.13 |
Draft Pin Sensor Out Of Range, Main Control Module (HCU) |
||
524234.04 |
Main Control Module Has Noted An Issue With The Enable Trans Pressure Sensor. (PTR) |
||
003509.03 |
Issue with module 5v supply Over 5v Detected Cab Control Module, Main Control Module (HCU) |
||
524254.03 |
Main Control Module Has Noted An Issue With The Voltage From The Transmission Enable Solenoid. (PTR) |
||
003509.04 |
Issue with module 5v supply Low Voltage Cab Control Module, Main Control Module (HCU) |
||
524254.04 |
Main Control Module Has Noted An Issue With The Voltage From The Transmission Enable Solenoid. (PTR) |
||
521000.02 |
External Hitch Switch Issue, Main Control Module (HCU) |
||
524267.15 |
Main Control Module Has Noted That A Forward/ Reverse Shuttle Was Done At A High Travel Speed. (PTR) |
||
000190.02 |
Engine Speed Low Main Control Module (HCU) |
||
000629.12 |
Internal Issue With Module, Restart Tractor and Check For Other Codes, Suspect Failed Module |
||
000630.13 |
There is an internal fault with the module software configuration Main Control Module (HCU) |
||
001638.02 |
Trans Oil Temp Below 29C/84F During Hitch Calibration. Main Control Module (HCU) |
||
001873.02 |
Rear Hitch Position Sensor Out Of Range Main Control Module (HCU) |
||
001873.03 |
Rear Hitch Position Sensor Voltage Out Of Range, Main Control Module (HCU) |
||
001873.04 |
Rear Hitch Position Sensor Voltage Out Of Range, Main Control Module (HCU) |
||
521002.06 |
Rear Hitch Control Valve High Amps, Main Control Module (HCU) |
||
521002.07 |
Rear Hitch Control Valve, Main Control Module (HCU) |
||
521002.11 |
Rear Hitch Control Valve Lower Position Out Of Range, Main Control Module (HCU) |
||
521002.13 |
Rear Hitch Control Valve Raise Position Out Of Range Calibration, Main Control Module (HCU) |
||
523832.03 |
Rear Hitch Drop Speed Dial Voltage Issue Main Control Module (HCU) |
||
523832.04 |
Rear Hitch Drop Speed Dial Voltage Issue Main Control Module (HCU) |
||
523832.13 |
Rear Hitch Drop Speed Dial Voltage Out Of Range Main Control Module (HCU) |
||
523833.03 |
Rear Hitch Maximum Height Dial Voltage Issue Main Control Module (HCU) |
||
521000.31 |
External Hitch Switch Issue, Main Control Module (HCU) |
||
523833.04 |
Rear Hitch Maximum Height Dial Voltage Issue Main Control Module (HCU) |
||
521001.02 |
Rear Hitch Calibration Issue, Main Control Module (HCU) |
||
523833.13 |
Rear Hitch Drop Speed Dial Voltage Out Of Range Main Control Module (HCU) |
||
521001.05 |
Rear Hitch Control Valve Low Amps, Main Control Module (HCU) |
||
523834.03 |
The Signal Voltage From The Rear Hitch Height Control Slide is High Main Control Module (HCU) |
||
521001.06 |
Rear Hitch Control Valve High Amps, Main Control Module (HCU) |
||
523834.04 |
The Signal Voltage From The Rear Hitch Height Control Slide Is Low Main Control Module (HCU) |
||
521001.07 |
Rear Hitch Control Valve Issue, Main Control Module (HCU) |
||
521001.11 |
Rear Hitch Control Valve Raise Position Out Of Range, Main Control Module (HCU) |
||
521001.13 |
Rear Hitch Control Valve Raise Position Out Of Range Calibration, Main Control Module (HCU) |
||
521002.05 |
Rear Hitch Control Valve Low Amps, Main Control Module (HCU) |
Search all 14,929 tractor error codes
