Search all 14,929 tractor error codes
Enter your error code and use the Tractor "Make" and "Model" to narrow down your search results
| Error Code | Description | Technical Documentation | Make & Models |
|---|---|---|---|
524071.06 |
The Forward Clutch Solenoid Amps Are High Main Control Module (PTR) |
||
524096.02 |
The Hand Throttle Signals Are Not Matching, Main Control Module (AIC) |
||
524096.03 |
The Signal From The Hand Throttle Sensor Is too High, Main Control Module (AIC) |
||
524096.04 |
The Signal From The Hand Throttle Sensor Is too Low, Main Control Module (AIC) |
||
524157.09 |
CAN BUS Message Fault Main Control Module (CCU) |
||
524157.19 |
CAN BUS Message Fault Main Control Module (CCU) |
||
524157.19 |
Front Chassis Module (SFA) CAN BUS Message Missing. |
||
524157.31 |
CAN BUS Message Fault Main Control Module (CCU) |
||
524162.09 |
CAN BUS Message Fault Main Control Module (CCU) |
||
524162.19 |
CAN BUS Message Fault Main Control Module (CCU) |
||
524162.19 |
Front Chassis Module (SFA) CAN BUS Message Missing. |
||
524162.31 |
CAN BUS Message Fault Main Control Module (CCU) |
||
524173.02 |
Clutch Pedal Voltage Inconsistent, Main Control Module (OIC) |
||
524173.03 |
Clutch Pedal Signal Voltage High, Main Control Module (OIC) |
||
524173.03 |
Clutch Pedal Voltage High Main Control Module (PTQ) |
||
524173.04 |
Clutch Pedal Signal Voltage Low, Main Control Module (OIC) |
||
524173.04 |
Clutch Pedal Signal Voltage Low Main Control Module (PTQ) |
||
524173.07 |
Clutch Pedal Signal Issue, Main Control Module (OIC) |
||
524191.02 |
Brake Pedal Has Been Pressed But The Air Brake System Pressure Did Not Drop Main Control Module (CCU) |
||
524191.03 |
Voltage At the Air Brake Solenoid Is high Main Control Module (CCU) |
||
524191.04 |
Voltage At the Air Brake Solenoid Is Low Main Control Module (CCU) |
||
524191.05 |
Voltage At the Air Brake Solenoid Is Low Main Control Module (CCU) |
||
524191.06 |
Amp Draw At the Air Brake Solenoid Is High Main Control Module (CCU) |
||
524191.19 |
CAN BUS Message Fault Main Control Module (CCU) |
||
524194.03 |
Trans Neutral Position Switch High Voltage |
||
524198.02 |
CAN BUS Message Issue Main Controller Main Control Module (CCU) |
||
524198.02 |
Front Chassis Module Internal Fault |
||
524212.02 |
The Signal Voltage From The Rear Hitch Height Control Slide is out of range, Main Control Module (AIC) |
||
524212.03 |
The Signal Voltage From The Rear Hitch Height Control Slide is too high, Main Control Module (AIC) |
||
524212.04 |
The Signal Voltage From The Rear Hitch Height Control Slide is Low, Main Control Module (AIC) |
||
524212.09 |
CAN BUS Message Error Between Modules For Hitch Depth Control, Main Control Module (HCC) |
||
524212.11 |
The Signal Voltage From The Rear Hitch Quick raise lower switch on the hand control unit is out of range, Main Control Module (AIC) |
||
524212.15 |
The Signal Voltage From The Rear Hitch Height Control Slide is out of range, Main Control Module (HCC) |
||
524212.19 |
CAN BUS Message Error Between Modules For Hitch Depth Control, Main Control Module (HCC) |
||
524212.31 |
CAN BUS Message Error Between Modules For Hitch Depth Control, Main Control Module (HCC) |
||
524216.02 |
Issue With Front PTO Switch Voltage, Main Control Module (AIC) |
||
524216.02 |
Issue With Message On The CAN BUS From The Main Control Module Relating To The Front PTO Switch Signal |
||
524216.09 |
CAN BUS Message Fault |
||
524216.19 |
Issue With Message On The CAN BUS From The Main Control Module Relating To The Front PTO Switch Signal Front Chassis Module (PTF) |
||
524216.31 |
Issue With Message On The CAN BUS From The Main Control Module Relating To The Front PTO Switch Signal Front Chassis Module (PTF) |
||
524218.09 |
CAN BUS Message Fault Main Control Module (CCU) |
||
524218.09 |
CAN BUS Message Issue With Communication Between the Cab Module Main Control Module (RPT)Module (RPT) |
||
524218.19 |
CAN BUS Message Fault Main Control Module (CCU) |
||
524218.31 |
CAN BUS Message Fault Main Control Module (CCU) |
||
524224.02 |
Rear PTO Switch Signal Issue, Main Control Module (AIC) |
||
524224.02 |
CAN BUS Message Issue With Communication Between the Cab Module Main Control Module (RPT) |
||
524224.09 |
Message Not Received On The State Of The Mud Guard Switches. CAN BUS Message Fault, Check For Other Codes |
||
524224.19 |
Issue With External PTO Switch. Check Other Error Codes |
||
524224.31 |
Issue With External PTO Switch. Check Other Error Codes |
||
524225.31 |
Issue With Signal From Crankshaft Position Sensor |
||
524226.08 |
Transmission Speed Sensor Miss Match Main Control Module (PTQ) |
||
524230.03 |
Transmission Enable Solenoid High Voltage Main Control Module (PTQ) |
||
524230.03 |
Transmission Enable Solenoid High Voltage Main Control Module (PTR) |
||
524230.04 |
Transmission Enable Solenoid Low Voltage Main Control Module (PTQ) |
||
524230.05 |
Transmission Enable Solenoid Amps Low Main Control Module (PTQ) |
||
524230.05 |
Transmission Enable Solenoid Amps Low Main Control Module (PTR) |
||
524230.06 |
Transmission Enable Solenoid Amps High Main Control Module (PTQ) |
||
524230.06 |
Transmission Enable Solenoid Amps High Main Control Module (PTR) |
||
524234.03 |
Transmission Enable Solenoid High Voltage Main Control Module (PTQ) |
||
524234.03 |
Transmission Enable Pressure Sensor High Voltage Main Control Module (PTR) |
||
524234.04 |
Transmission Enable Solenoid Low Voltage Main Control Module (PTQ) |
||
524234.04 |
Transmission Enable Pressure Sensor low Voltage Main Control Module (PTR) |
||
524235.03 |
Issue With 4WD Solenoid Circuit High Voltage Main Control Module (CCU) |
||
524235.05 |
Issue With 4WD Solenoid Circuit Low Voltage Main Control Module (CCU) |
||
524235.06 |
Issue With 4WD Solenoid Circuit High Amp Draw Main Control Module (CCU) |
||
524235.31 |
Issue With 4WD Solenoid Circuit Main Control Module (CCU) |
||
524252.04 |
Rear PTO Solenoid Voltage Low Main Control Module (RPT)Module (RPT) |
||
524252.05 |
Rear PTO Solenoid Amps Low Main Control Module (RPT)Module (RPT) |
||
524252.14 |
Rear PTO Solenoid Voltage High Main Control Module (RPT)Module (RPT) |
||
524252.15 |
Rear PTO Solenoid Amps High Main Control Module (RPT)Module (RPT) |
||
524252.17 |
Rear PTO Solenoid Open Circuit Main Control Module (RPT)Module (RPT) |
||
524254.02 |
Problem With The Signals For Transmission Enable And Neutral Main Control Module (PTQ) |
||
524254.03 |
Transmission Enable Solenoid High Voltage Main Control Module (TIQ) |
||
524254.04 |
Transmission Enable Solenoid Low Voltage Main Control Module (TIQ) |
||
524259.00 |
Module Over heating. If the module is not hot it could be an internal issue with the module |
||
524259.15 |
Module Over heating. If the module is not hot it could be an internal issue with the module |
||
524259.16 |
Module Over heating. If the module is not hot it could be an internal issue with the module |
||
524264.02 |
CAN BUS Message Issue With Communication Between the Dash Module and the Main Controller. Check for Other Codes, Dash Module (FCC) |
||
524267.16 |
Clutch Eng augment Is Outside The Stored Time Main Control Module (PTQ) |
Search all 14,929 tractor error codes