John Deere Tractor Error Codes for Models 6110M, 6120M, 6130M, 6145M, 6155M, 6175M, 6195M (2015-2022)

Loading...
Error CodeDescriptionTechnical DocumentationMake & Models
523368.02

Internal issue with the configuration of the module. Most likely caused during reprogramming Front Chassis Module (SFA)

523653.01

Battery Supply Voltage Low

523653.14

Battery Supply To ECU Was Disconnected Before The ECU Had Fully Shutdown

523665.01

Battery Supply Voltage Low

523665.03

Voltage To Module Over 16 Volts Front Chassis Module (PTF)

523665.03

Voltage To Module Over 16 Volts Front Chassis Module (PTF)

523665.04

Voltage To Module Is Low Front Chassis Module (PTF)

523665.04

Voltage To Module Is Low Front Chassis Module (PTF)

523666.01

Battery Supply Voltage Low

523666.03

The module has detected a high Battery Supply Main Control Module (CCU)

523666.03

Voltage To Module Over 16 Volts Front Chassis Module (PTF)

523666.03

The module has detected a high Battery Supply Main Control Module (PTR)

523666.03

The module has detected a high Battery Supply Main Control Module (RPT)

523666.04

The module has detected a low Voltage Supply Main Control Module (CCU)

523666.04

Voltage To Module Is Low Front Chassis Module (PTF)

523666.04

The module has detected a low Voltage Supply Main Control Module (PTR)

523666.04

The module has detected a low Voltage Supply Main Control Module (RPT)

523671.11

Issue With The Position Signals From The Gear Shift Lever, Command Quad, Cab Control Module (DOI)

523677.02

Clutch Switch On Gear Lever Voltage Issue, Cab Control Module (DOI)

523677.02

Clutch Switch On Gear Lever Voltage Issue, Cab Control Module (OIC)

523677.02

Clutch Switch On Gear Lever Voltage Issue Main Control Module (TIQ)

523677.03

Clutch Switch On Gear Lever Voltage Issue, Cab Control Module (DOI)

523677.03

Clutch Switch On Gear Lever Voltage Issue, Cab Control Module (OIC)

523677.04

Clutch Switch On Gear Lever Voltage Issue, Cab Control Module (DOI)

523677.04

Clutch Switch On Gear Lever Voltage Issue, Cab Control Module (OIC)

523677.07

Clutch Switch On Gear Lever Switch Issue, Cab Control Module (DOI)

523677.07

Clutch Switch On Gear Lever Switch Issue, Cab Control Module (OIC)

523677.31

Clutch Button On Gear Lever Pressed But Driver Was Not On Seat, Restart Tractor, Check For Other Error Codes. Module Main Control Module (PTQ)

523690.03

External Hitch Switch Issue, Main Control Module (OIC)

523690.04

External Hitch Switch Issue, Main Control Module (OIC)

523701.05

Rear Hitch Control Valve Low Amps, Main Control Module (HCC)

523701.06

Rear Hitch Control Valve High Amps, Main Control Module (HCC)

523702.14

Module Internal Issue Cab Module (EIC)

523702.31

Module Internal Issue Cab Module (EIC)

523703.03

Right Draft Pin Sensor Signal Voltage High, Main Control Module (HCC)

523703.04

Right Draft Pin Sensor Signal Voltage Low, Main Control Module (HCC)

523703.13

Draft Pin Sensor Out Of Range, Main Control Module (HCC)

523711.02

Transmission Speed Sensor Miss Match Main Control Module (PTQ)

523749.31

Rear PTO Speed Slippage High. Main Control Module (RPT)

523751.05

Rear Hitch Control Valve Low Amps, Main Control Module (HCC)

523751.06

Rear Hitch Control Valve High Amps, Main Control Module (HCC)

523758.03

External PTO Switch High Voltage Right Side Switch, Main Control Module (OIC)

523758.04

External PTO Switch Low Voltage Right Side Switch, Main Control Module (OIC)

523759.03

External PTO Switch High Voltage Left Side Switch, Main Control Module (OIC)

523759.04

External PTO Switch Low Voltage Right Side Switch, Main Control Module (OIC)

523775.02

Arm Rest Joystick Lever Fault Cab Control Module (DOI)

523776.02

Arm Rest Joystick Lever Lock Button Fault Cab Control Module (DOI)

523789.05

Steering Wheel Sensor Issue Steering Module (XSC)

523789.13

Front Axle Steering Sensor Not Calibrated Main Control Module (CCU)

523789.13

Cab Steering Wheel Sensor Not Calibrated Steering Module (XMC)

523789.13

Cab Steering Wheel Sensor Not Calibrated Steering Module (XSC)

523795.07

Steering Enable Valve Issue Steering Module (XSC)

523795.13

Steering Valve Not Calibrated Steering Module (XMC)

523795.13

Steering Valve Not Calibrated Steering Module (XSC)

523804.02

Arm Rest Joystick Lever Side To Side Sensor Fault Cab Control Module (DOI)

523804.03

Arm Rest Joystick Lever Side To Side Sensor Fault Cab Control Module (DOI)

523804.04

Arm Rest Joystick Lever Side To Side Sensor Fault Cab Control Module (DOI)

523805.02

Arm Rest Joystick Lever Side To Side Sensor Fault Cab Control Module (DOI)

523805.03

Arm Rest Joystick Lever Side To Side Sensor Fault Cab Control Module (DOI)

523805.04

Arm Rest Joystick Lever Side To Side Sensor Fault Cab Control Module (DOI)

523815.03

Steering Control Valve High Voltage Steering Module (XSC)

523815.04

Steering Control Valve Low Voltage Steering Module (XSC)

523815.05

Steering Control Valve Low Amps Steering Module (XSC)

523815.06

Steering Control Valve High Amps

523824.10

Steering Wheel Sensor Signal 2 Issue Steering Module (XSC)

523824.16

Steering Wheel Sensor Signal 2 Issue Steering Module (XSC)

523824.18

Steering Wheel Sensor Signal 2 Issue Steering Module (XSC)

523824.20

Steering Wheel Sensor Signal 2 Issue Steering Module (XSC)

523824.21

Steering Wheel Sensor Signal 2 Issue Steering Module (XSC)

523826.00

Front Axle Steering Angle Position Sensor Issue Steering Module (XSC)

523826.01

Front Axle Steering Angle Position Sensor Issue Steering Module (XSC)

523826.03

Front Axle Steering Angle Position Sensor Signals Out Of Range High Voltage Main Control Module (CCU)

523826.04

Front Axle Steering Angle Position Sensor Signals Out Of Range Low Voltage Main Control Module (CCU)

523826.14

No Movement Of Front Axle When Turn Was Requested

523832.03

Rear Hitch Drop Speed Dial Voltage Issue Main Control Module (HCC)

523832.04

Rear Hitch Drop Speed Dial Voltage Issue Main Control Module (HCC)

523832.13

Rear Hitch Drop Speed Dial Voltage Out Of Range Main Control Module (HCC)

523833.03

Rear Hitch Maximum Height Dial Voltage Issue Main Control Module (HCC)

523833.04

Rear Hitch Maximum Height Dial Voltage Issue Main Control Module (HCC)

523833.13

Rear Hitch Drop Speed Dial Voltage Out Of Range Main Control Module (HCC)

523834.03

The Signal Voltage From The Rear Hitch Height Control Slide is High Main Control Module (HCC)

523834.04

The Signal Voltage From The Rear Hitch Height Control Slide Is Low Main Control Module (HCC)

523834.13

The Signal Voltage From The Rear Hitch Height Control Slide is out of range Main Control Module (HCC)

523842.03

Rear Hitch Draft Control Dial High Voltage Issue Main Control Module (HCC)

523842.04

Rear Hitch Draft Control Dial Low Voltage Issue Main Control Module (HCC)

523842.13

Rear Hitch Draft Control Dial Voltage Out Of Range Main Control Module (HCC)

523847.03

SFA Pressure Up Solenoid High Voltage Front Chassis Module (SFA)

523847.05

SFA Pressure Up Solenoid Low Amps Front Chassis Module (SFA)

523847.06

Transmission Enable Solenoid Amps High Main Control Module (PTQ)

523847.06

SFA Pressure Up Solenoid High Amps Front Chassis Module (SFA)

523904.31

Driver Seat Presence Switch Not Detected Front Chassis Module (PTF)

523905.04

Front PTO Solenoid Voltage Low Front Chassis Module (PTF)

523905.05

Front PTO Solenoid Amps Low Front Chassis Module (PTF)

523905.14

Front PTO Solenoid Voltage High Front Chassis Module (PTF)

523905.15

Front PTO Solenoid Amps High Front Chassis Module (PTF)

523905.17

Front PTO Solenoid Open Circuit Front Chassis Module (PTF)

523908.09

CAN BUS Message Issue With Communication Between the Cab Module Main Control Module (RPT)

523908.14

Rear External PTO Switch Is On

523908.19

Issue With External PTO Switch. Check Other Error Codes

523908.31

Issue With External PTO Switch. Check Other Error Codes

523910.02

Internal Issue Detected In Module, Main Control Module (HCC)

523925.09

CAN BUS Message Fault Steering Module (XSC)

523948.03

SFA Down Solenoid High Voltage Front Chassis Module (SFA)

523948.05

SFA Down Solenoid Low Amps Front Chassis Module (SFA)

523948.06

SFA Down Solenoid High Amps Front Chassis Module (SFA)

523949.03

SFA Up Solenoid High Voltage Front Chassis Module (SFA)

523949.05

SFA Up Solenoid Low Amps Front Chassis Module (SFA)

523949.06

SFA Up Solenoid High Amps Front Chassis Module (SFA)

523950.13

Rear Hitch Position Sensor Out Of Range Main Control Module (HCC)

523951.02

During A SFA Calibration The Axle Moved In The Wrong Direction

523951.10

SFA Not Reached The Required Position

523951.13

SFA Not Calibrated Or Out Of Calibrated Range

523951.14

SFA Not Calibrated Or Out Of Calibrated Range

523951.15

The Pressure In The SFA Has Not Dropped While Calibrating

523953.02

Issue With Signals From The Forward/Reverse Lever Main Control Module (PTQ)

523954.11

Gear Shift Selector Speed Dial Potentiometer Signal Voltage Too Low, Cab Control Module (DOI)

523961.07

Issue With Signals From The Forward/Reverse Lever Main Control Module (PTQ)

523961.07

Park Lock Issue Main Control Module (TIQ)

523964.03

SFA Pressure Down Solenoid High Voltage Front Chassis Module (SFA)

523964.05

SFA Pressure Down Solenoid Low Amps Front Chassis Module (SFA)

523964.06

SFA Pressure Down Solenoid High Amps Front Chassis Module (SFA)

523965.31

Axle Has Not Reached Its Position Front Chassis Module (SFA)

523966.04

The module has detected a low Voltage Supply Main Control Module (PTR)

523966.31

Limp Home Mode Activated Main Control Module (PTQ)

523971.03

The Signal Voltage From The Rear Hitch Height Control Slide is too high, Main Control Module (AIC)

523971.04

The Signal Voltage From The Rear Hitch Height Control Slide is too Low, Main Control Module (AIC)

523971.13

The Depth control slide position sensor is not calibrated, Main Control Module (AIC)

523974.02

Axle Pressure Sensor Detected Incorrect Pressure In The Front Axle Circuit Front Chassis Module (SFA)

523974.03

SFA Oil Pressure Sensor High Voltage Front Chassis Module (SFA)

523974.04

SFA Oil Pressure Sensor Low Voltage Front Chassis Module (SFA)

523974.14

SFA Axle Pressure Too Low Front Chassis Module (SFA)

523974.16

SFA Axle Pressure Too High During Lowering Front Chassis Module (SFA)

523974.18

SFA Axle Pressure Too Low Front Chassis Module (SFA)

523975.03

Axle Has Not Reached Its Position During Calibration Front Chassis Module (SFA)

523975.04

Axle Has Not Reached Its Position During Calibration

523975.13

Axle Has Not Reached Its Position

523976.03

Axle Position Sensor Voltage High

523976.04

Axle Position Sensor Voltage Low

523976.31

Axle Has Not Reached Its Position

524022.31

Issue With Signals From The Forward/Reverse Lever. No Position Signal, Check Power To Lever, Dash Module (FCC)

524055.02

Front Chassis Module Internal Fault

524055.02

Steering Module Internal Software Issue Steering Module (XMC)

524055.02

Steering Module Internal Software Issue Steering Module (XSC)

524055.12

Steering Module Internal Software Issue Steering Module (XMC)

524055.12

Steering Module Internal Software Issue Steering Module (XSC)

524069.03

The Reverse Clutch Solenoid High Voltage Main Control Module (PTR)

524069.05

The Reverse Clutch Solenoid Amps Are Low Main Control Module (PTR)

524069.06

The Reverse Clutch Solenoid Amps Are High Main Control Module (PTR)

524071.03

The Forward Clutch Solenoid High Voltage Main Control Module (PTR)

524071.05

The Forward Clutch Solenoid Amps Are Low Main Control Module (PTR)

Search all 14,929 tractor error codes