John Deere Tractor Error Codes for Models 6110M, 6120M, 6130M, 6145M, 6155M, 6175M, 6195M (2015-2022)

001807.10

Steering Wheel Sensor Signal 1 Issue Steering Module (XSC)

001807.16

Steering Wheel Sensor Signal 1 Issue Steering Module (XSC)

001807.18

Steering Wheel Sensor Signal 1 Issue Steering Module (XSC)

001807.20

Steering Wheel Sensor Signal 1 Issue Steering Module (XSC)

001807.21

Steering Wheel Sensor Signal 1 Issue Steering Module (XSC)

001807.31

Axle Steering Wheels Have Moved But Steering Valves Have Not Been Activated Steering Module (XSC)

001865.09

CAN BUS Message Fault Main Control Module (CCU)

001865.19

CAN BUS Message Fault Main Control Module (CCU)

001865.19

CAN BUS Message From Hitch Module Not Available

001871.09

CAN BUS Message Fault From Bridge module between the implement and the Main Controller on the Tractor, Main Control Module (BLC)

001871.19

CAN Bus Message Fault From the Implement CAN BUS System, Main Control Module (BLC)

001871.31

CAN Bus Message Fault From the Implement CAN BUS System, Main Control Module (BLC)

001873.02

Rear Hitch Position Sensor Out Of Range Main Control Module (HCC)

001873.03

Rear Hitch Position Sensor Voltage Out Of Range, Main Control Module (HCC)

001873.04

Rear Hitch Position Sensor Voltage Out Of Range, Main Control Module (HCC)

001873.11

Rear Hitch Position Sensor Voltage Out Of Range, Main Control Module (HCC)

001873.13

Rear Hitch Calibration Issue, Main Control Module (HCC)

001873.31

Rear Hitch Position Sensor Issue, Main Control Module (HCC)

001877.06

Issue With Implement Switch Amps At Module Output, Main Control Module (BLC)

001877.09

CAN BUS Message Issue With Message From The Hitch Controller. Internal Message Issue In Main Controller, Main Control Module (BLC)

001877.19

Rear Hitch Fault, Check For Other Error Codes, Main Control Module (BLC)

001877.31

Rear Hitch Fault, Check For Other Error Codes, Main Control Module (BLC)

001881.03

Left Draft Pin Sensor Signal Voltage High, Main Control Module (HCC)

001881.04

Left Draft Pin Sensor Signal Voltage Low, Main Control Module (HCC)

001881.13

Draft Pin Sensor Out Of Range, Main Control Module (HCC)

001881.19

CAN BUS Message From Hitch Module Not Available

001883.31

Rear Pto Speed Is High. But Engine Speed and PTO Speed Selected Indicate The PTO Speed is Not High Main Control Module (RPT)

001893.31

Front PTO Switch Was On When Engine Started Front Chassis Module (PTF)

001894.31

Rear PTO Switch Was On When Engine Started Main Control Module (RPT)

002000.09

CAN BUS Message Issue With Communication Between the Engine Module and the Main Controller. Check for Other Codes, Main Control Module (BLC)

002000.09

CAN BUS Message Issue With Communication Between the Modules. Check for Other Codes Main Control Module (CCU)

002000.09

CAN BUS Message Issue With Communication Between the Modules. Check for Other Codes Cab Module (EIC)

002000.09

CAN BUS Message Issue With Communication Between the Modules. Check for Other Codes Front Chassis Module (PTF)

002000.09

CAN BUS Message Issue With Communication Between the Modules. Check for Other Codes Main Control Module (PTQ)

002000.09

CAN BUS Message Issue With Communication Between the Modules. Check for Other Codes Main Control Module (PTR)

002000.09

CAN BUS Message Issue With Communication Between the Modules. Check for Other Codes Main Control Module (RPT)

002000.09

CAN BUS Message Issue With Communication Between the Modules. Check for Other Codes Rear Chassis (SFA)

002000.09

CAN BUS Message Fault Main Control Module (TIQ)

002000.09

CAN BUS Message Fault Steering Module (XSC))

002003.09

CAN BUS Message Fault Main Control Module (CCU)

002003.09

CAN BUS Message Issue With Communication Between the Engine Module and the Main Controller. Check for Other Codes

002003.09

CAN BUS Message Fault, Dash Module (FCC)

002003.09

CAN BUS Message Fault Main Control Module (RPT)

002003.09

CAN BUS Message Issue With Communication Between the Modules. Check for Other Codes Rear Chassis (SFA)

002003.09

CAN BUS Message Fault Main Control Module (TIQ)

002003.09

CAN BUS Message Fault Steering Module (XSC)

002005.09

CAN BUS Message Fault Main Control Module (CCU)

002005.09

CAN BUS Message Fault, Dash Module (FCC)

002005.09

CAN BUS Message Fault Main Control Module (PTQ)

002005.09

CAN BUS Message Fault Front Chassis Module (SFA)

002005.09

CAN BUS Message Fault Steering Module (XSC)

002005.12

CAN BUS Message Fault Main Control Module (PTQ)

002006.09

CAN BUS Message Issue With Communication Between the Engine Module and the Main Controller. Check for Other Codes

002006.09

CAN BUS Message Fault Main Control Module (TIQ)

002006.13

There is an internal fault with the module software configuration

002006.14

There is an internal fault with the module software configuration

002006.19

There is an internal fault with the module software configuration

002007.09

CAN BUS Message Issue With Message From The PTO Module. Internal Message Issue In Main Controller, Main Control Module (BLC)

002007.09

CAN BUS Message Fault Cab Module (EIC)

002007.09

CAN BUS Message Fault Main Control Module (TIQ)

002019.09

CAN BUS Message Fault Main Control Module (CCU)

002019.09

CAN BUS Message Fault Main Control Module (PTQ)

002019.09

CAN BUS Message Fault Main Control Module (TIQ)

002019.09

CAN BUS Message Fault Steering Module (XMC)

002020.09

CAN BUS Message Fault Main Control Module (TIQ)

002025.09

There is an internal fault with the module software configuration

002028.09

CAN BUS Message Fault Steering Module (XSC)

002029.09

CAN BUS Message Fault Cab Module (EIC)

002029.09

CAN BUS Message Fault Cab Module (EIC)

002035.09

CAN BUS Message Issue With Message From The Hitch Controller. Internal Message Issue In Main Controller, Main Control Module (BLC)

002035.09

CAN BUS Message Fault Front Chassis Module (SFA)

002035.09

CAN BUS Message Fault Main Control Module (TIQ)

002036.09

CAN BUS Message Issue With Communication Between the Front PTO Module and the Main Controller. Check for Other Codes, Main Control Module (BLC)

002036.09

CAN BUS Message Fault Main Control Module (TIQ)

002042.09

CAN BUS Message Fault Steering Module (XSC)

002049.09

CAN BUS Message Issue With Message From The Operator Interface Module Internal Message Issue In , Main Control Module (BLC)

002049.09

CAN BUS Message Fault Main Control Module (CCU)

002049.09

CAN BUS Message Fault, Main Control Module (HCC)

002049.09

CAN BUS Message Fault Front Chassis Module (PTF)

002049.09

CAN BUS Message Fault Main Control Module (PTQ)

002049.09

CAN BUS Message Fault Main Control Module (PTR)

002049.09

CAN BUS Message Fault Main Control Module (RPT)

002049.09

CAN BUS Message Fault Front Chassis Module (SFA)

002049.09

CAN BUS Message Fault Main Control Module (TIQ)

002049.09

CAN BUS Message Fault Steering Module (XSC)

002050.06

CAN BUS Message Issue With Communication Between the BLC Module and the , Main Control Module (BLC)

002071.09

CAN BUS Message Issue With Message From The CCU Module Internal Message Issue In Main Controller

002071.09

There is an internal fault with the module software configuration

002071.09

CAN BUS Message Fault, Main Control Module (HCC)

002071.09

CAN BUS Message Issue With Communication Between the Cab Module Front Chassis Module (PTF)

002071.09

CAN BUS Message Fault Main Control Module (PTR)

002071.09

CAN BUS Message Issue With Communication Between the Cab Module Main Control Module (RPT)

002071.09

CAN BUS Message Fault Front Chassis Module (SFA)

002071.09

CAN BUS Message Fault Main Control Module (TIQ)

002071.09

CAN BUS Message Fault Steering Module (XSC)

002139.09

CAN BUS Message Fault Main Control Module (CCU)

002139.09

CAN BUS Message Fault, Main Control Module (HCC)

002139.09

CAN BUS Message Fault Front Chassis Module (PTF)

002139.09

CAN BUS Message Fault Main Control Module (RPT)

002140.09

CAN BUS Message Issue With Message From The AIC Module Internal Message Issue In Main Controller, Main Control Module (BLC)

002140.09

CAN BUS Message Fault Cab Module (EIC)

002140.09

CAN BUS Message Fault, Main Control Module (HCC)

002140.09

CAN BUS Message Issue With Communication Between the Cab Module Front Chassis Module (PTF)

002140.09

CAN BUS Message Fault Main Control Module (PTR)

002140.09

CAN BUS Message Issue With Communication Between the Cab Module Main Control Module (RPT)

002140.09

CAN BUS Message Fault Main Control Module (TIQ)

002141.09

CAN BUS Message Fault, Main Control Module (OIC)

002145.06

CAN BUS Message Fault, Dash Module (FCC)

002145.09

CAN BUS Message Issue With Message From The FCC Module Internal Message Issue In Main Controller, Main Control Module (BLC)

002145.09

CAN BUS Message Fault Main Control Module (CCU)

002145.09

CAN BUS Message Fault Main Control Module (PTQ)

002145.09

CAN BUS Message Fault Main Control Module (PTR)

002145.09

CAN BUS Message Fault Main Control Module (TIQ)

002152.09

CAN BUS Message Fault, Main Control Module (HCC)

002161.09

CAN BUS Message Fault Main Control Module (TIQ)

002185.09

CAN BUS Message Fault Cab Module (EIC)

002198.09

CAN BUS Message Fault Steering Module (XSC)

002238.09

CAN BUS Message Issue With Communication Between the Cab Module Front Chassis Module (PTF)

002238.09

CAN BUS Message Issue With Communication Between the Cab Module Main Control Module (RPT)

002240.09

CAN BUS Message Issue With Message From The TEC Module Internal Message Issue In Main Controller, Main Control Module (BLC)

002240.09

CAN BUS Message Issue With Communication Between the Cab Module Main Control Module (RPT)

002348.03

There is Voltage Detected at The Headlight High Beam Pin On The Module When The Headlights Are Turned Off. Likely a Voltage Back Feed In The Loom, Main Control Module (BLC)

002348.05

There is Low Amps Detected at The Headlight High Beam Pin On The Module When The Headlights Are Turned On. Could Be A Blown Bulb Or High Resistance In A Connector., Main Control Module (BLC)

002348.06

There is High Amps Detected at The Headlight High Beam Pin On The Module When The Headlights Are Turned On. Could Be A Bulb Or Short Circuit To Earth, Main Control Module (BLC)

002350.03

There is Voltage Detected at The Headlight Low Beam Pin On The Module When The Headlights Are Turned Off. Likely a Voltage Back Feed In The Loom, Main Control Module (BLC)

002350.05

There is Low Amps Detected at The Headlight Low Beam Pin On The Module When The Headlights Are Turned On. Could Be A Blown Bulb Or High Resistance In A Connector., Main Control Module (BLC)

002350.06

There is High Amps Detected at The Headlight Low Beam Pin On The Module When The Headlights Are Turned On. Could Be A Bulb Or Short Circuit To Earth

002352.03

There is Voltage Detected at The Grab Rail Headlight Low Beam Pin On The Module When The Headlights Are Turned Off. Likely a Voltage Back Feed In The Loom. , Main Control Module (BLC)

002352.05

There is Low Amps Detected at The Grab Rail Headlight Low Beam Pin On The Module When The Headlights Are Turned On. Could Be A Blown Bulb Or High Resistance In A Connector., Main Control Module (BLC)

002352.06

There is High Amps Detected at The Grab Rail Headlight Low Beam Pin On The Module When The Headlights Are Turned On. Could Be A Bulb Or Short Circuit To Earth, Main Control Module (BLC)

002354.03

There is Voltage Detected on The Bonnet Corner Work light Pin On The Module When The Work lights Are Turned Off. Likely a Voltage Back Feed In The Loom. , Main Control Module (BLC)

002354.05

There is Low Amps Detected on The Bonnet Corner Work light Pin On The Module When The Work lights Are Turned On. Could Be A Blown Bulb Or High Resistance In A Connector., Main Control Module (BLC)

002354.06

There is High Amps Detected on The Bonnet Corner Work light Pin On The Module When The Work lights Are Turned On. Could Be A Bulb Or A Short To Earth, Main Control Module (BLC)

002358.03

There is Voltage Detected at The Grab Rail Headlight High Beam/Work Light Pin On The Module When The Headlights/ Work lights Are Turned Off. Likely a Voltage Back Feed In The Loom. , Main Control Module (BLC)

002358.05

There is Low Amps Detected at The Grab Rail Headlight High Beam/Work Light Pin On The Module When The Lights Are Turned On. Could Be A Blown Bulb Or High Resistance In A Connector., Main Control Module (BLC)

002358.06

There is High Amps Detected at The Grab Rail Headlight High Beam/Work Light Pin On The Module When The Lights Are Turned On. Could Be A Bulb Or Short Circuit To Earth, Main Control Module (BLC)

002360.03

There is Voltage Detected on The Rear Mud Guard Corner Work light Pin On The Module When The Work lights Are Turned Off. Likely a Voltage Back Feed In The Loom. , Main Control Module (BLC)

002360.05

There is Low Amps Detected on The Rear Mud Guard Corner Work light Pin On The Module When The Work lights Are Turned On. Could Be A Blown Bulb Or High Resistance In A Connector., Main Control Module (BLC)

002360.06

There is High Amps Detected on The Rear Mud Guard Corner Work light Pin On The Module When The Work lights Are Turned On. Could Be A Bulb Or Short To Earth, Main Control Module (BLC)

002362.03

There is Voltage Detected on The Rear Roof Inner Work light Pin On The Module When The Work lights Are Turned Off. Likely a Voltage Back Feed In The Loom. , Main Control Module (BLC)

002362.05

There is Low Amps Detected on The Rear Roof Inner Work light Pin On The Module When The Work lights Are Turned On. Could Be A Blown Bulb Or High Resistance In A Connector., Main Control Module (BLC)

002362.06

There is High Amps Detected on The Rear Roof Inner Work light Pin On The Module When The Work lights Are Turned On. Could Be A Bulb Or A Short To Earth, Main Control Module (BLC)

002368.03

Left Turn Signal High Voltage. Check The Bulbs First. Broken Wire, Bad Connection, Dash Module (FCC)

002368.05

Left Turn Signal Low Amps. Check The Bulbs First. Broken Wire, Bad Connection, Dash Module (FCC)

002368.06

Left Turn Signal High Amps. Check For A Short To Earth. Check Bulbs, Dash Module (FCC)

002370.03

RIGH Turn Signal High Voltage. Check The Bulbs First. Broken Wire, Bad Connection, Dash Module (FCC)

002370.05

RIGH Turn Signal Low Amps. Check The Bulbs First. Broken Wire, Bad Connection, Dash Module (FCC)

002370.06

RIGHT Turn Signal High Amps. Check For A Short To Earth. Check Bulbs, Dash Module (FCC)

002372.03

Brake Lights On Tractor High Voltage, Main Control Module (BLC)

002372.05

Brake Lights On Tractor Low Amp Draw, Main Control Module (BLC) Cab Module (CLC)