Search all 14,929 tractor error codes
Enter your error code and use the Tractor "Make" and "Model" to narrow down your search results
| Error Code | Description | Technical Documentation | Make & Models |
|---|---|---|---|
05.03.83 |
Issue With Signal Voltage From Suspended Front Axle Position Sensor During Calibration (SUSPENSION) |
||
05.03.84 |
Issue With Signal Voltage From Suspended Front Axle Position Sensor During Calibration (SUSPENSION) |
||
05.1.33 |
Issue With 4wd Solenoid Circuit (Hitch) |
||
05.1.53 |
Issue With Diff Lock Solenoid Circuit (Hitch) |
||
05.2.33 |
Issue With 4wd Solenoid Circuit (Hitch) |
||
05.2.53 |
Issue With Diff Lock Solenoid Circuit (Hitch) |
||
05.X.31 |
Issue With Signal From 4wd Button On Side Pillar Dyna VT |
||
05.X.32 |
Issue With Signal From Auto 4wd Button On Side Pillar Dyna VT |
||
05.X.33 |
Issue With 4wd Solenoid Circuit Dyna VT (TRANS1) |
||
05.X.33 |
Issue With 4wd Solenoid Circuit (Hitch) |
||
05.X.51 |
Issue With Signal From Diff Lock Button On Side Pillar Dyna VT |
||
05.X.53 |
Issue With Diff Lock Solenoid Circuit Dyna VT (TRANS1) |
||
05.X.53 |
Issue With Diff Lock Solenoid Circuit (Hitch) |
||
05.X.54 |
Issue With Left Brake Pedal Switch Signal Dyna VT (TRANS1) |
||
05.X.55 |
Issue With Right Brake Pedal Switch Signal Dyna VT (TRANS1) |
||
05.X.80 |
Issue With Front Axle Calibration Stored In Suspension Module Dyna VT (SUSPENSION) |
||
05.X.81 |
Issue With Signal Voltage From Suspended Front Axle Position Sensor. (SUSPENSION) |
||
05.X.82 |
Issue With Signal Voltage From Suspended Front Axle Position Sensor. (SUSPENSION) |
||
05.X.83 |
Issue With Signal Voltage From Suspended Front Axle Position Sensor During Calibration (SUSPENSION) |
||
05.X.84 |
Issue With Signal Voltage From Suspended Front Axle Position Sensor During Calibration (SUSPENSION) |
||
06.0.04 |
Issue With PTO Solenoid Circuit (Hitch) |
||
06.0.06 |
Issue With PTO Solenoid Circuit (Hitch) |
||
06.0.07 |
Issue With PTO Solenoid Circuit (Hitch) |
||
06.0.08 |
The Engine RPM Has Dropped Too Much When The PTO Was Engauged. (HITCH) |
||
06.0.09 |
Issue With PTO Circuit (Hitch) |
||
06.0.1E |
Issue With PTO Circuit (Hitch) |
||
06.0.4B |
Issue With PTO Slipping (Hitch) |
||
06.0.4C |
Issue With PTO Over Speed Compared To Engine Speed. (HITCH) |
||
06.0.4D |
Issue With PTO Stub Shaft 540/1000 (HITCH) |
||
06.0.4E |
Issue With PTO Stub Shaft 1000 (HITCH) |
||
06.0.E2 |
Issue With PTO Speed Too Fast In ECO (Hitch) |
||
06.00.01 |
Rear PTO Switch Signal Issue Dyna VT (TRANS1) |
||
06.00.02 |
Issue With Signal From Right External Rear PTO On/Off Button Dyna VT (TRANS1) |
||
06.00.03 |
Issue With Signal From External Left PTO On/Off Button Dyna VT (TRANS1) |
||
06.00.04 |
Issue With PTO Solenoid Circuit (Hitch) |
||
06.00.04 |
Issue With Rear PTO On/Off Solenoid Power Supply Dyna VT (TRANS1) |
||
06.00.04 |
Issue With Rear PTO On/Off Solenoid Power Supply Dyna 6 (TRANS1) |
||
06.00.05 |
Issue With Rear PTO Clutch Speed Sensor Signal Dyna VT (TRANS1) |
||
06.00.06 |
Issue With PTO Solenoid Circuit (Hitch) |
||
06.00.06 |
Issue With Rear PTO On/Off Solenoid Power Supply Dyna 6 (TRANS1) |
||
06.00.07 |
Issue With PTO Solenoid Circuit (Hitch) |
||
06.00.07 |
Issue With Rear PTO On/Off Solenoid Power Supply Dyna 6 (TRANS1) |
||
06.00.08 |
The Engine RPM Has Dropped Too Much When The PTO Was Engauged. (HITCH) |
||
06.00.08 |
Engine Speed Dropped Too Much During PTO Engagement. Anti Stall Function Dyna 6 (TRANS1) |
||
06.00.09 |
Issue With PTO Circuit (Hitch) |
||
06.00.09 |
PTO Switch Is On But The PTO Is Not Turning Dyna 6 (TRANS1) |
||
06.00.10 |
Issue With Rear PTO Shaft Output Speed Sensor Signal Dyna VT (TRANS1) |
||
06.00.11 |
Issue With Signal From Auto PTO Button Dyna VT (TRANS1) |
||
06.00.12 |
Issue With Signal From PTO Neutral Button Dyna VT (TRANS1) |
||
06.00.13 |
Issue With Signal From PTO 540 Button Dyna VT (TRANS1) |
||
06.00.13 |
Issue With Signal From PTO 540 Button Dyna VT (TRANS1) |
||
06.00.17 |
Issue With Signal From PTO 540 ECO Button Dyna VT (TRANS1) |
||
06.00.17 |
Issue With Signal From PTO 540 ECO Button Dyna VT (TRANS1) |
||
06.00.18 |
Issue With Signal From PTO 1000 Button Dyna VT (TRANS1) |
||
06.00.18 |
Issue With Signal From PTO 1000 Button Dyna VT (TRANS1) |
||
06.00.19 |
Issue With Signal From PTO 1000 ECO Button Dyna VT (TRANS1) |
||
06.00.19 |
Issue With Signal From PTO 1000 ECO Button Dyna VT (TRANS1) |
||
06.00.1A |
Issue With Voltage To PTO Standard Speed Solenoid Dyna VT (TRANS1) |
||
06.00.1B |
Issue With Voltage To PTO ECO Speed Solenoid Dyna VT (TRANS1) |
||
06.00.1C |
Issue With Voltage To 540 PTO Speed Solenoid Dyna VT (TRANS1) |
||
06.00.1D |
Issue With Voltage To 1000 PTO Speed Solenoid Dyna VT (TRANS1) |
||
06.00.1E |
Issue With PTO Circuit (Hitch) |
||
06.00.41 |
Rear PTO Switch Signal Issue Dyna VT (TRANS1) |
||
06.00.43 |
Issue With Signal From External PTO On/Off Button Dyna VT (TRANS1) |
||
06.00.45 |
Issue With Values Received From Rear PTO Speed Sensors Dyna VT (TRANS1) |
||
06.00.49 |
There Is A Speed Reading from The PTO Speed Sensor That Does Not Match The Speed Selected Switch Dyna 6 (TRANS2) |
||
06.00.4A |
There Is A Speed Reading from The PTO Speed Sensor That Does Not Match The Speed Selected Switch Dyna 6 (TRANS2) |
||
06.00.4B |
Issue With PTO Slipping (Hitch) |
||
06.00.4C |
Issue With PTO Over Speed Compared To Engine Speed. (HITCH) |
||
06.00.4D |
Issue With PTO Stub Shaft 540/1000 (HITCH) |
||
06.00.4E |
Issue With PTO Stub Shaft 1000 (HITCH) |
||
06.00.50 |
Issue With Values Received From Rear PTO Speed Sensors Dyna VT (TRANS1) |
||
06.00.55 |
Issue With Signal From PTO Neutral Button Dyna VT (TRANS1) |
||
06.00.60 |
Issue With Signal Values From PTO Clutch Speed Sensor And PTO Output Speed Sensor DYNA VT (TRANS1) |
||
06.00.A1 |
Issue With Message On The CAN BUS From PTO Switch DYNA VT (TRANS1) |
||
06.00.B0 |
Issue With Message On The CAN BUS From PTO Switch DYNA VT (TRANS1) |
||
06.00.B5 |
Issue With CAN BUS From PTO Neutral Button Dyna VT (TRANS1) |
||
06.00.B6 |
Issue With CAN BUS From PTO 540 Button Dyna VT (TRANS1) |
||
06.00.B7 |
Issue With CAN BUS From PTO 540 ECO Button Dyna VT (TRANS1) |
||
06.00.B8 |
Issue With CAN BUS From PTO 1000 Button Dyna VT (TRANS1) |
||
06.00.B9 |
Issue With CAN BUS From PTO 1000 ECO Button Dyna VT (TRANS1) |
||
06.00.E0 |
Transmission Internal Software Issue (TRANS) |
||
06.00.E1 |
Transmission Internal Software Issue (TRANS) |
||
06.00.E2 |
Issue With PTO Speed Too Fast In ECO (Hitch) |
||
06.00.E2 |
Issue With Rear PTO On/Off Solenoid Power Supply Dyna VT (TRANS1) |
||
06.00.E2 |
Engine Speed Too High For Eco PTO Speed Mode Dyna 6 (TRANS2) |
||
06.00.E3 |
Issue With Rear PTO On/Off Solenoid Power Supply Dyna VT (TRANS1) |
||
06.00.E4 |
Issue With Rear PTO On/Off Solenoid Power Supply Dyna VT (TRANS1) |
||
06.00.E5 |
Issue With Values Received From Rear PTO Speed Sensors Dyna VT (TRANS1) |
||
06.00.E6 |
Issue With Values Received From Rear PTO Speed Sensors Dyna VT (TRANS1) |
||
06.00.E7 |
Issue With Rear PTO On/Off Solenoid Power Supply Dyna VT (TRANS1) |
||
06.00.E7 |
Transmission Module 1 Software Issue Detected For Rear PTO Circuit Dyna 6 (TRANS1) |
||
06.00.E8 |
Issue With Rear PTO On/Off Solenoid Power Supply Dyna VT (TRANS1) |
||
06.01.01 |
Rear PTO Switch Signal Issue Dyna VT (TRANS1) |
||
06.01.02 |
Issue With Signal From Right External Rear PTO On/Off Button Dyna VT (TRANS1) |
||
06.01.03 |
Issue With Signal From External Left PTO On/Off Button Dyna VT (TRANS1) |
||
06.01.04 |
Issue With PTO Solenoid Circuit (Hitch) |
||
06.01.04 |
Issue With Rear PTO On/Off Solenoid Power Supply Dyna VT (TRANS1) |
||
06.01.04 |
Issue With Rear PTO On/Off Solenoid Power Supply Dyna 6 (TRANS1) |
||
06.01.05 |
Issue With Rear PTO Clutch Speed Sensor Signal Dyna VT (TRANS1) |
||
06.01.06 |
Issue With PTO Solenoid Circuit (Hitch) |
||
06.01.06 |
Issue With Rear PTO On/Off Solenoid Power Supply Dyna 6 (TRANS1) |
||
06.01.07 |
Issue With PTO Solenoid Circuit (Hitch) |
||
06.01.07 |
Issue With Rear PTO On/Off Solenoid Power Supply Dyna 6 (TRANS1) |
||
06.01.08 |
The Engine RPM Has Dropped Too Much When The PTO Was Engauged. (HITCH) |
||
06.01.08 |
Engine Speed Dropped Too Much During PTO Engagement. Anti Stall Function Dyna 6 (TRANS1) |
||
06.01.09 |
Issue With PTO Circuit (Hitch) |
||
06.01.09 |
PTO Switch Is On But The PTO Is Not Turning Dyna 6 (TRANS1) |
||
06.01.10 |
Issue With Rear PTO Shaft Output Speed Sensor Signal Dyna VT (TRANS1) |
||
06.01.11 |
Issue With Signal From Auto PTO Button Dyna VT (TRANS1) |
||
06.01.12 |
Issue With Signal From PTO Neutral Button Dyna VT (TRANS1) |
||
06.01.13 |
Issue With Signal From PTO 540 Button Dyna VT (TRANS1) |
||
06.01.13 |
Issue With Signal From PTO 540 Button Dyna VT (TRANS1) |
||
06.01.17 |
Issue With Signal From PTO 540 ECO Button Dyna VT (TRANS1) |
||
06.01.17 |
Issue With Signal From PTO 540 ECO Button Dyna VT (TRANS1) |
||
06.01.18 |
Issue With Signal From PTO 1000 Button Dyna VT (TRANS1) |
||
06.01.18 |
Issue With Signal From PTO 1000 Button Dyna VT (TRANS1) |
||
06.01.19 |
Issue With Signal From PTO 1000 ECO Button Dyna VT (TRANS1) |
||
06.01.19 |
Issue With Signal From PTO 1000 ECO Button Dyna VT (TRANS1) |
||
06.01.1A |
Issue With Voltage To PTO Standard Speed Solenoid Dyna VT (TRANS1) |
||
06.01.1B |
Issue With Voltage To PTO ECO Speed Solenoid Dyna VT (TRANS1) |
||
06.01.1C |
Issue With Voltage To 540 PTO Speed Solenoid Dyna VT (TRANS1) |
||
06.01.1D |
Issue With Voltage To 1000 PTO Speed Solenoid Dyna VT (TRANS1) |
||
06.01.1E |
Issue With PTO Circuit (Hitch) |
||
06.01.41 |
Rear PTO Switch Signal Issue Dyna VT (TRANS1) |
||
06.01.43 |
Issue With Signal From External PTO On/Off Button Dyna VT (TRANS1) |
||
06.01.45 |
Issue With Values Received From Rear PTO Speed Sensors Dyna VT (TRANS1) |
||
06.01.49 |
There Is A Speed Reading from The PTO Speed Sensor That Does Not Match The Speed Selected Switch Dyna 6 (TRANS2) |
||
06.01.4A |
There Is A Speed Reading from The PTO Speed Sensor That Does Not Match The Speed Selected Switch Dyna 6 (TRANS2) |
||
06.01.4B |
Issue With PTO Slipping (Hitch) |
||
06.01.4C |
Issue With PTO Over Speed Compared To Engine Speed. (HITCH) |
||
06.01.4D |
Issue With PTO Stub Shaft 540/1000 (HITCH) |
||
06.01.4E |
Issue With PTO Stub Shaft 1000 (HITCH) |
||
06.01.50 |
Issue With Values Received From Rear PTO Speed Sensors Dyna VT (TRANS1) |
||
06.01.55 |
Issue With Signal From PTO Neutral Button Dyna VT (TRANS1) |
||
06.01.60 |
Issue With Signal Values From PTO Clutch Speed Sensor And PTO Output Speed Sensor DYNA VT (TRANS1) |
||
06.01.A1 |
Issue With Message On The CAN BUS From PTO Switch DYNA VT (TRANS1) |
||
06.01.B0 |
Issue With Message On The CAN BUS From PTO Switch DYNA VT (TRANS1) |
||
06.01.B5 |
Issue With CAN BUS From PTO Neutral Button Dyna VT (TRANS1) |
||
06.01.B6 |
Issue With CAN BUS From PTO 540 Button Dyna VT (TRANS1) |
||
06.01.B7 |
Issue With CAN BUS From PTO 540 ECO Button Dyna VT (TRANS1) |
||
06.01.B8 |
Issue With CAN BUS From PTO 1000 Button Dyna VT (TRANS1) |
||
06.01.B9 |
Issue With CAN BUS From PTO 1000 ECO Button Dyna VT (TRANS1) |
||
06.01.E0 |
Transmission Internal Software Issue (TRANS) |
||
06.01.E1 |
Transmission Internal Software Issue (TRANS) |
||
06.01.E2 |
Issue With PTO Speed Too Fast In ECO (Hitch) |
||
06.01.E2 |
Issue With Rear PTO On/Off Solenoid Power Supply Dyna VT (TRANS1) |
||
06.01.E2 |
Engine Speed Too High For Eco PTO Speed Mode Dyna 6 (TRANS2) |
||
06.01.E3 |
Issue With Rear PTO On/Off Solenoid Power Supply Dyna VT (TRANS1) |
||
06.01.E4 |
Issue With Rear PTO On/Off Solenoid Power Supply Dyna VT (TRANS1) |
Search all 14,929 tractor error codes