John Deere Tractor Error Codes

524173.04

Clutch Pedal Signal Voltage Issue

524173.07

Clutch Pedal Signal Issue, Main Control Module (OIC)

524173.07

Clutch Pedal Signal Issue, Cab Module (OIC)

524173.07

Clutch Pedal Signal Issue Cab Module (TIA)

524173.14

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.14

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.14

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.14

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.14

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.14

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.14

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.15

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.15

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.15

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.15

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.15

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.15

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.15

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.16

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.16

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.16

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.16

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.16

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.16

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.16

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.17

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.17

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.17

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.17

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.17

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.17

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.17

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.18

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.18

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.18

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.18

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.18

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.18

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.18

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524174.19

Missing Info On The CAN BUS, Transmission Module IVT (PTA)

524175.03

High Voltage On The Wheel Speed Sensor, Rear Chassis Module (PLC)

524175.04

Low Voltage On The Wheel Speed Sensor, Rear Chassis Module (PLC)

524175.19

Missing Info On The CAN BUS, Transmission Module IVT (PTA)

524176.19

Missing Info On The CAN BUS, Transmission Module IVT (PTA)

524177.19

Missing Info On The CAN BUS, Transmission Module IVT (PTA)

524178.19

Missing Info On The CAN BUS, Transmission Module IVT (PTA)

524179.19

Missing Info On The CAN BUS, Transmission Module IVT (PTA)

524180.19

Missing Info On The CAN BUS, Transmission Module IVT (PTA)

524181.19

Missing Info On The CAN BUS, Transmission Module IVT (PTA)

524182.19

Missing Info On The CAN BUS, Transmission Module IVT (PTA)

524183.19

Missing Info On The CAN BUS, Transmission Module IVT (PTA)

524188.01

There is an internal fault with the module software configuration Cab Module (TIA)

524190.14

The Tractor Has Activated Its Anti Jack Knife Control Cab Module (TIA)

524191.02

Brake Pedal Has Been Pressed But The Air Brake System Pressure Did Not Drop Main Control Module (CCU)

524191.02

Brake Pedal Has Been Pressed But The Air Brake System Pressure Did Not Drop Rear Chassis (CCU)

524191.03

Voltage At the Air Brake Solenoid Is high Main Control Module (CCU)

524191.03

Voltage At the Air Brake Solenoid Is high Rear Chassis (CCU)

524191.04

Voltage At the Air Brake Solenoid Is Low Main Control Module (CCU)

524191.04

Voltage At the Air Brake Solenoid Is Low Rear Chassis (CCU)

524191.05

Voltage At the Air Brake Solenoid Is Low Main Control Module (CCU)

524191.05

Voltage At the Air Brake Solenoid Is Low Rear Chassis (CCU)

524191.06

Amp Draw At the Air Brake Solenoid Is High Main Control Module (CCU)

524191.06

Amp Draw At the Air Brake Solenoid Is High Rear Chassis (CCU)

524191.19

CAN BUS Message Fault Main Control Module (CCU)

524191.19

CAN BUS Message Fault Rear Chassis (CCU)

524193.14

Transmission Oil Temperature Too Low. Automatic Warm Up. Transmission Will Not Function Until Oil Is Over -15C/5F, Range Module Direct Drive (PTD)

524193.14

Transmission Oil Temperature Too Low. Automatic Warm Up Is Active And Transmission Use Is Limited Or Locked Cab Module (TIA)

524193.31

Transmission Oil Temperature Too Low. Automatic Warm Up Is Active And Transmission Use Is Limited Or Locked Cab Module (TIA)

524194.03

Trans Neutral Position Switch High Voltage

524195.03

High Voltage On The Park Lock Pressure Sensor, Rear Chassis Module (PLC)

524195.04

Low Voltage On The Park Lock Pressure Sensor, Rear Chassis Module (PLC)

524198.02

CAN BUS Message Issue Main Controller Main Control Module (CCU)

524198.02

Front Chassis Module Internal Fault

524198.02

Front Chassis Module Internal Fault

524202.03

High Voltage On Ambient Air Temp Cab Roof Above Right Side Front Corner Roof Module (ATC)

524202.03

High Voltage On Ambient Air Temp Cab Roof Above Right Side Front Corner, Air Conditioning Module (ETC)

524202.04

Low Voltage On Ambient Air Temp Cab Roof Above Right Side Front Corner Roof Module (ATC)

524202.04

Low Voltage On Ambient Air Temp Cab Roof Above Right Side Front Corner, Air Conditioning Module (ETC)

524203.03

High Voltage On Ambient Air Temp Front Beside AC Receiver Dryer Roof Module (ATC)

524203.03

High Voltage On Ambient Air Temp Front Beside AC Receiver Dryer, Air Conditioning Module (ETC)

524203.04

Low Voltage On Ambient Air Temp Cab Roof Above Right Side Front Corner Roof Module (ATC)

524203.04

Low Voltage On Ambient Air Temp Cab Roof Above Right Side Front Corner, Air Conditioning Module (ETC)

524212.02

The Signal Voltage From The Rear Hitch Height Control Slide is out of range, Main Control Module (AIC)

524212.02

The Signal Voltage From The Rear Hitch Height Control Slide is out of range Either Cab Module (AIC), Or Arm Rest Module (AIC) If Fitted

524212.03

The Signal Voltage From The Rear Hitch Height Control Slide is too high, Main Control Module (AIC)

524212.04

The Signal Voltage From The Rear Hitch Height Control Slide is Low, Main Control Module (AIC)

524212.09

CAN BUS Message Error Between Modules For Hitch Depth Control, Main Control Module (HCC)

524212.09

CAN BUS Message Error Between Modules For Hitch Depth Control, Rear Chassis Module (HCC)

524212.11

The Signal Voltage From The Rear Hitch Quick raise lower switch on the hand control unit is out of range, Main Control Module (AIC)

524212.15

The Signal Voltage From The Rear Hitch Height Control Slide is out of range, Main Control Module (HCC)

524212.15

The Signal Voltage From The Rear Hitch Height Control Slide is out of range, Rear Chassis Module (HCC)

524212.19

CAN BUS Message Error Between Modules For Hitch Depth Control, Main Control Module (HCC)

524212.19

CAN BUS Message Error Between Modules For Hitch Depth Control, Rear Chassis Module (HCC)

524212.31

CAN BUS Message Error Between Modules For Hitch Depth Control, Main Control Module (HCC)

524212.31

CAN BUS Message Error Between Modules For Hitch Depth Control, Rear Chassis Module (HCC)

524216.02

Issue With Front PTO Switch Voltage, Main Control Module (AIC)

524216.02

Issue With Message On The CAN BUS From The Main Control Module Relating To The Front PTO Switch Signal

524216.02

Issue With Front PTO Switch Voltage Either Cab Module (AIC), Or Arm Rest Module (AIC) If Fitted

524216.02

Issue With Message On The CAN BUS From The Main Control Module Relating To The Front PTO Switch Signal

524216.09

CAN BUS Message Fault

524216.09

CAN BUS Message Fault Either Cab Module (AIC), Or Arm Rest Module (AIC) If Fitted

524216.09

CAN BUS Message Fault

524216.19

Issue With Message On The CAN BUS From The Main Control Module Relating To The Front PTO Switch Signal Front Chassis Module (PTF)

524216.19

Issue With Message On The CAN BUS From The Main Control Module Relating To The Front PTO Switch Signal Front Chassis Module (PTF)

524216.31

Issue With Message On The CAN BUS From The Main Control Module Relating To The Front PTO Switch Signal Front Chassis Module (PTF)

524216.31

Issue With Message On The CAN BUS From The Main Control Module Relating To The Front PTO Switch Signal Front Chassis Module (PTF)

524218.09

CAN BUS Message Fault Main Control Module (CCU)

524218.09

CAN BUS Message Issue With Communication Between the Cab Module Main Control Module (RPT)Module (RPT)

524218.09

CAN BUS Message Issue With Communication Between the Cab Module Rear Chassis Module (RPT)

524218.12

Park Lock Still On When Powered Zero Active, Transmission Module IVT (PTA)

524218.19

CAN BUS Message Fault Main Control Module (CCU)

524218.19

CAN BUS Message Fault Rear Chassis (CCU)

524218.31

CAN BUS Message Fault Main Control Module (CCU)

524218.31

CAN BUS Message Fault Rear Chassis (CCU)

524218.31

Powered Zero Transmission Request From Lever For Too Long, Transmission Module IVT (PTA)

524219.02

Signal From The Screen Defog Sensor Out Of Range. Sensor Mounted On Windscreen Roof Module (ATC)

524219.02

Signal From The Screen Defog Sensor Out Of Range. Sensor Mounted On Windscreen, Air Conditioning Module (ETC)

524219.03

High Voltage From The Screen Defog Sensor. Sensor Mounted On Windscreen Roof Module (ATC)

524219.03

High Voltage From The Screen Defog Sensor. Sensor Mounted On Windscreen, Air Conditioning Module (ETC)

524219.04

Low Voltage From The Screen Defog Sensor. Sensor Mounted On Windscreen Roof Module (ATC)

524219.04

Low Voltage From The Screen Defog Sensor. Sensor Mounted On Windscreen, Air Conditioning Module (ETC)

524223.03

Diff Lock Switch On Floor Has Been Pressed For Too Long. Rear Chassis (CCU)

524223.03

Diff Lock Switch On Floor Has Been Pressed For Too Long, Cab Module (OIC)

524223.03

Main Control Module Has Noted The Diff Lock Button Has Been Pressed For Too Long (CCU)

524223.03

Main Control Module Has Noted The Diff Lock Button Has Been Pressed For Too Long (CCU)

524223.03

Main Control Module Has Noted The Diff Lock Button Has Been Pressed For Too Long (CCU)

524223.03

Main Control Module Has Noted The Diff Lock Button Has Been Pressed For Too Long (CCU)

524224.02

Rear PTO Switch Signal Issue, Main Control Module (AIC)

524224.02

CAN BUS Message Issue With Communication Between the Cab Module Main Control Module (RPT)

524224.02

Rear PTO Switch Signal Issue Either Cab Module (AIC), Or Arm Rest Module (AIC) If Fitted

524224.09

Message Not Received On The State Of The Mud Guard Switches. CAN BUS Message Fault, Check For Other Codes

524224.09

CAN BUS Message Fault, Check For Other Codes Either Cab Module (AIC), Or Arm Rest Module (AIC) If Fitted

524224.09

CAN BUS Message Issue With Communication Between the Cab Module Rear Chassis (RPT)

524224.09

Message Not Received On The State Of The Mud Guard Switches. CAN BUS Message Fault, Check For Other Codes

524224.14

Main Control Module Has Noted An Issue With The Signal From The PTO Switch. PTO Switch On Signal Received When Tractor Was Started. (CCU)

524224.14

Main Control Module Has Noted An Issue With The Signal From The PTO Switch. PTO Switch On Signal Received When Tractor Was Started. (CCU)

524224.14

Main Control Module Has Noted An Issue With The Signal From The PTO Switch. PTO Switch On Signal Received When Tractor Was Started. (CCU)

524224.14

Main Control Module Has Noted An Issue With The Signal From The PTO Switch. PTO Switch On Signal Received When Tractor Was Started. (CCU)

524224.14

Main Control Module Has Noted An Issue With The Signal From The PTO Switch. PTO Switch On Signal Received When Tractor Was Started. (CCU)

524224.14

Main Control Module Has Noted An Issue With The Signal From The PTO Switch. (CCU)

524224.19

Issue With External PTO Switch. Check Other Error Codes

524224.19

Issue With External PTO Switch. Check Other Error Codes

524224.31

Issue With External PTO Switch. Check Other Error Codes

524224.31

Issue With External PTO Switch. Check Other Error Codes

524225.31

Issue With Signal From Crankshaft Position Sensor

524225.31

Issue With Signal From Crankshaft Position Sensor

524226.08

Transmission Speed Sensor Miss Match Main Control Module (PTQ)

524230.03

Transmission Enable Solenoid High Voltage Main Control Module (PTQ)

524230.03

Transmission Enable Solenoid High Voltage Main Control Module (PTR)

524230.03

Transmission Enable Solenoid High Voltage Rear Chassis Module (PTQ)