Search all 14,929 tractor error codes
Enter your error code and use the Tractor "Make" and "Model" to narrow down your search results
| Error Code | Description | Technical Documentation | Make & Models |
|---|---|---|---|
523974.16 |
SFA Axle Pressure Too High During Lowering Front Chassis Module (SFA) |
||
523974.18 |
SFA Axle Pressure Too Low Front Chassis Module (SFA) |
||
523974.18 |
SFA Axle Pressure Too Low Front Chassis Module (SFA) |
||
523975.03 |
Axle Has Not Reached Its Position During Calibration Front Chassis Module (SFA) |
||
523975.03 |
Axle Has Not Reached Its Position During Calibration Front Chassis Module (SFA) |
||
523975.04 |
Axle Has Not Reached Its Position During Calibration |
||
523975.04 |
Axle Has Not Reached Its Position During Calibration |
||
523975.13 |
Axle Has Not Reached Its Position |
||
523975.13 |
Axle Has Not Reached Its Position |
||
523976.03 |
Axle Position Sensor Voltage High |
||
523976.03 |
Axle Position Sensor Voltage High |
||
523976.04 |
Axle Position Sensor Voltage Low |
||
523976.04 |
Axle Position Sensor Voltage Low |
||
523976.31 |
Axle Has Not Reached Its Position |
||
523976.31 |
Axle Has Not Reached Its Position |
||
524015.09 |
CAN BUS Message Fault, Rear Chassis (SCC) |
||
524016.04 |
Central Control Module Has Noted An Issue With The Ignition Supply Voltage. (CCU) |
||
524016.04 |
Central Control Module Has Noted An Issue With The Ignition Supply Voltage. (CCU) |
||
524017.31 |
Forward/Reverse Drive Lever Voltage Issue Either Cab Module (AIC), Or Arm Rest Module (AIC) If Fitted |
||
524019.31 |
Forward/Reverse Drive Lever Neutral Position Issue Either Cab Module (AIC), Or Arm Rest Module (AIC) If Fitted |
||
524020.31 |
Main Control Module Has Noted The Shuttle Lever Was Not In Neutral When Tractor Was Turned On. (PTR) |
||
524020.31 |
Main Control Module Has Noted The Shuttle Lever Was Not In Neutral When Tractor Was Turned On. (PTR) |
||
524020.31 |
The Module sees the forward/reverse lever is in a not neutral position during start up. Move lever to Neutral or Park and restart the engine. Either Cab Module (AIC), Or Arm Rest Module (AIC) If Fitted |
||
524020.31 |
Main Control Module Has Noted The Shuttle Lever Was Not In Neutral When Tractor Was Turned On. (PTR) |
||
524020.31 |
Main Control Module Has Noted The Shuttle Lever Was Not In Neutral When Tractor Was Turned On. (PTR) |
||
524020.31 |
Main Control Module Has Noted The Shuttle Lever Was Not In Neutral When Tractor Was Turned On. (PTR) |
||
524020.31 |
Main Control Module Has Noted The Shuttle Lever Was Not In Neutral When Tractor Was Turned On. (PTR) |
||
524020.31 |
Main Control Module Has Noted The Shuttle Lever Was Not In Neutral When Tractor Was Turned On. (PTR) |
||
524021.31 |
Main Control Module Has Noted The Shuttle Lever Reverse Signal Issue. (PTR) |
||
524021.31 |
Main Control Module Has Noted The Shuttle Lever Reverse Signal Issue. (PTR) |
||
524021.31 |
Forward/Reverse Lever Sending Multiple Signals at The Same Time Either Cab Module (AIC), Or Arm Rest Module (AIC) If Fitted |
||
524021.31 |
Main Control Module Has Noted The Shuttle Lever Reverse Signal Issue. (PTR) |
||
524021.31 |
Main Control Module Has Noted The Shuttle Lever Reverse Signal Issue. (PTR) |
||
524021.31 |
Main Control Module Has Noted The Shuttle Lever Reverse Signal Issue. (PTR) |
||
524021.31 |
Main Control Module Has Noted The Shuttle Lever Reverse Signal Issue. (PTR) |
||
524021.31 |
Main Control Module Has Noted The Shuttle Lever Reverse Signal Issue. (PTR) |
||
524022.31 |
Issue With Signals From The Forward/Reverse Lever. No Position Signal, Check Power To Lever, Dash Module (FCC) |
||
524022.31 |
Issue With Signals From The Forward/Reverse Lever. No Position Signal, Check Power To Lever, Dash Module (FCC) |
||
524032.01 |
Forward/Reverse Lever Sending Multiple Signals at The Same Time Cab Module (TIA) |
||
524032.04 |
Forward/Reverse Lever Sending Multiple Signals at The Same Time Cab Module (TIA) |
||
524037.02 |
Main Control Module Has Noted An Issue With The Voltage On The 4WD Circuit. (CCU) |
||
524037.02 |
Main Control Module Has Noted An Issue With The Voltage On The 4WD Circuit. (CCU) |
||
524037.02 |
Main Control Module Has Noted An Issue With The Voltage On The 4WD Circuit. (CCU) |
||
524037.02 |
Main Control Module Has Noted An Issue With The Voltage On The 4WD Circuit. (CCU) |
||
524038.09 |
CAN BUS Message Fault, Rear Chassis (SCC) |
||
524055.02 |
Front Chassis Module Internal Fault |
||
524055.02 |
Steering Module Internal Software Issue Steering Module (XMC) |
||
524055.02 |
Steering Module Internal Software Issue Steering Module (XSC) |
||
524055.02 |
Front Chassis Module Internal Fault |
||
524055.02 |
Steering Module Internal Software Issue Steering Module (XMC) |
||
524055.02 |
Steering Module Internal Software Issue Steering Module (XSC) |
||
524055.12 |
Steering Module Internal Software Issue Steering Module (XMC) |
||
524055.12 |
Steering Module Internal Software Issue Steering Module (XSC) |
||
524055.12 |
Steering Module Internal Software Issue Steering Module (XMC) |
||
524055.12 |
Steering Module Internal Software Issue Steering Module (XSC) |
||
524069.03 |
The Reverse Clutch Solenoid High Voltage Main Control Module (PTR) |
||
524069.05 |
The Reverse Clutch Solenoid Amps Are Low Main Control Module (PTR) |
||
524069.06 |
The Reverse Clutch Solenoid Amps Are High Main Control Module (PTR) |
||
524071.03 |
The Forward Clutch Solenoid High Voltage Main Control Module (PTR) |
||
524071.05 |
The Forward Clutch Solenoid Amps Are Low Main Control Module (PTR) |
||
524071.06 |
The Forward Clutch Solenoid Amps Are High Main Control Module (PTR) |
||
524096.02 |
The Hand Throttle Signals Are Not Matching, Main Control Module (AIC) |
||
524096.02 |
The Hand Throttle Signals Are Not Matching/ Or The Speed Control Lever For IVT Either Cab Module (AIC), Or Arm Rest Module (AIC) If Fitted |
||
524096.03 |
The Signal From The Hand Throttle Sensor Is too High, Main Control Module (AIC) |
||
524096.03 |
The Signal From The Hand Throttle Sensor Is too High. (power quad transmission Either Cab Module (AIC), Or Arm Rest Module (AIC) If Fitted |
||
524096.04 |
The Signal From The Hand Throttle Sensor Is too Low, Main Control Module (AIC) |
||
524096.04 |
The Signal From The Hand Throttle Sensor Is too Low. (power quad transmission Either Cab Module (AIC), Or Arm Rest Module (AIC) If Fitted |
||
524101.02 |
Signal Voltage From The SCV Switch Does Not Match The SCV Valve Position Signal Valve 6 Either Cab Module (AIC), Or Arm Rest Module (AIC) If Fitted |
||
524102.02 |
Signal Voltage From The SCV Switch Does Not Match The SCV Valve Position Signal Valve 5 Either Cab Module (AIC), Or Arm Rest Module (AIC) If Fitted |
||
524103.02 |
Signal Voltage From The SCV Switch Does Not Match The SCV Valve Position Signal Valve 4 Either Cab Module (AIC), Or Arm Rest Module (AIC) If Fitted |
||
524104.02 |
Signal Voltage From The SCV Switch Does Not Match The SCV Valve Position Signal Valve 3 Either Cab Module (AIC), Or Arm Rest Module (AIC) If Fitted |
||
524105.02 |
Signal Voltage From The SCV Switch Does Not Match The SCV Valve Position Signal Valve 2 Either Cab Module (AIC), Or Arm Rest Module (AIC) If Fitted |
||
524107.03 |
High Voltage On Hydro Solenoid Valve Y2 , Transmission Module IVT (PTA) |
||
524107.04 |
Low Voltage On Hydro Solenoid Valve Y2 , Transmission Module IVT (PTA) |
||
524107.05 |
Low Amp Draw On Hydro Solenoid Valve Y2 , Transmission Module IVT (PTA) |
||
524108.03 |
High Voltage On Hydro Solenoid Valve Y1 , Transmission Module IVT (PTA) |
||
524108.04 |
Low Voltage On Hydro Solenoid Valve Y1 , Transmission Module IVT (PTA) |
||
524108.05 |
Low Amp Draw On Hydro Solenoid Valve Y1 , Transmission Module IVT (PTA) |
||
524109.10 |
Wheel Speed Sensor Issue , Transmission Module IVT (PTA) |
||
524110.03 |
Transmission Output Speed Sensor Voltage High , Transmission Module IVT (PTA) |
||
524110.03 |
Transmission Output Speed Sensor Voltage Low , Transmission Module IVT (PTA) |
||
524110.08 |
Transmission Output Speed Sensor Signal Discrepancy , Transmission Module IVT (PTA) |
||
524153.03 |
High Voltage On Clutch BG Solenoid , Transmission Module IVT (PTA) |
||
524153.04 |
Low Voltage On Clutch BG Solenoid , Transmission Module IVT (PTA) |
||
524153.05 |
Low Amps On Clutch BG Solenoid , Transmission Module IVT (PTA) |
||
524154.03 |
High Voltage On Forward Clutch KV Solenoid , Transmission Module IVT (PTA) |
||
524154.04 |
Low Voltage On Forward Clutch KV Solenoid , Transmission Module IVT (PTA) |
||
524154.05 |
Low Amps On Forward Clutch KV Solenoid , Transmission Module IVT (PTA) |
||
524155.03 |
High Voltage On Forward Clutch KR Solenoid , Transmission Module IVT (PTA) |
||
524155.04 |
Low Voltage On Forward Clutch KR Solenoid , Transmission Module IVT (PTA) |
||
524155.05 |
Low Amps On Forward Clutch KR Solenoid IVT |
||
524156.07 |
Issue With The Hydro Speed, Transmission Module IVT (PTA) |
||
524157.02 |
Right Brake Pedal Position Sensor Issue, Cab Module (OIC) |
||
524157.09 |
CAN BUS Message Fault Main Control Module (CCU) |
||
524157.09 |
CAN BUS Message Fault Rear Chassis (CCU) |
||
524157.19 |
CAN BUS Message Fault Main Control Module (CCU) |
||
524157.19 |
Front Chassis Module (SFA) CAN BUS Message Missing. |
||
524157.19 |
CAN BUS Message Fault Rear Chassis (CCU) |
||
524157.19 |
CAN BUS Message Fault Rear Chassis (CSC) |
||
524157.19 |
Front Chassis Module (SFA) CAN BUS Message Missing. |
||
524157.31 |
CAN BUS Message Fault Main Control Module (CCU) |
||
524157.31 |
CAN BUS Message Fault Rear Chassis (CCU) |
||
524160.02 |
Main Control Module Has Noted An Issue With The Signal Voltages From The Shuttle Lever (PTR) |
||
524160.02 |
Main Control Module Has Noted An Issue With The Signal Voltages From The Shuttle Lever (PTR) |
||
524160.02 |
Main Control Module Has Noted An Issue With The Signal Voltages From The Shuttle Lever (PTR) |
||
524160.02 |
Main Control Module Has Noted An Issue With The Signal Voltages From The Shuttle Lever (PTR) |
||
524160.02 |
Main Control Module Has Noted An Issue With The Signal Voltages From The Shuttle Lever (PTR) |
||
524160.02 |
Main Control Module Has Noted An Issue With The Signal Voltages From The Shuttle Lever (PTR) |
||
524160.02 |
Main Control Module Has Noted An Issue With The Signal Voltages From The Shuttle Lever (PTR) |
||
524161.19 |
Missing Info On The CAN BUS, Transmission Module IVT (PTA) |
||
524162.09 |
CAN BUS Message Fault Main Control Module (CCU) |
||
524162.09 |
CAN BUS Message Fault Rear Chassis (CCU) |
||
524162.09 |
CAN BUS Message Fault Cab Module (CLC) |
||
524162.19 |
CAN BUS Message Fault Main Control Module (CCU) |
||
524162.19 |
Front Chassis Module (SFA) CAN BUS Message Missing. |
||
524162.19 |
CAN BUS Message Fault Rear Chassis (CCU) |
||
524162.19 |
CAN BUS Message Fault Rear Chassis (CSC) |
||
524162.19 |
Front Chassis Module (SFA) CAN BUS Message Missing. |
||
524162.31 |
CAN BUS Message Fault Main Control Module (CCU) |
||
524162.31 |
CAN BUS Message Fault Rear Chassis (CCU) |
||
524165.19 |
Missing Info On The CAN BUS Rear Chassis (CSC) |
||
524165.19 |
Missing Info On The CAN BUS, Transmission Module IVT (PTA) |
||
524167.19 |
Missing Info On The CAN BUS Rear Chassis (CSC) |
||
524167.19 |
Missing Info On The CAN BUS, Transmission Module IVT (PTA) |
||
524170.19 |
Missing Info On The CAN BUS, Transmission Module IVT (PTA) |
||
524171.19 |
Missing Info On The CAN BUS, Transmission Module IVT (PTA) |
||
524172.19 |
Missing Info On The CAN BUS, Transmission Module IVT (PTA) |
||
524173.02 |
Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR) |
||
524173.02 |
Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR) |
||
524173.02 |
Clutch Pedal Voltage Inconsistent, Main Control Module (OIC) |
||
524173.02 |
Clutch Pedal Voltage Inconsistent, Cab Module (OIC) |
||
524173.02 |
Clutch Pedal Voltage Inconsistent, Range Module Direct Drive (PL3) |
||
524173.02 |
Clutch Pedal Voltage Inconsistent |
||
524173.02 |
Clutch Pedal Voltage Inconsistent (TID) Direct Drive Gear Shift Module |
||
524173.02 |
Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR) |
||
524173.02 |
Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR) |
||
524173.02 |
Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR) |
||
524173.02 |
Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR) |
||
524173.02 |
Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR) |
||
524173.03 |
Clutch Pedal Signal Voltage High, Main Control Module (OIC) |
||
524173.03 |
Clutch Pedal Voltage High Main Control Module (PTQ) |
||
524173.03 |
Clutch Pedal Signal Voltage High, Cab Module (OIC) |
||
524173.03 |
Clutch Pedal Signal Voltage High, Range Module Direct Drive (PL3) |
||
524173.03 |
Clutch Pedal Signal Voltage High Rear Chassis Module (PTQ) |
||
524173.03 |
Clutch Pedal Signal Voltage Issue |
||
524173.04 |
Clutch Pedal Signal Voltage Low, Main Control Module (OIC) |
||
524173.04 |
Clutch Pedal Signal Voltage Low Main Control Module (PTQ) |
||
524173.04 |
Clutch Pedal Signal Voltage Low, Cab Module (OIC) |
||
524173.04 |
Clutch Pedal Signal Voltage Low, Range Module Direct Drive (PL3) |
||
524173.04 |
Clutch Pedal Signal Voltage Low Rear Chassis Module (PTQ) |
Search all 14,929 tractor error codes