Search all 14,929 tractor error codes
Enter your error code and use the Tractor "Make" and "Model" to narrow down your search results
| Error Code | Description | Technical Documentation | Make & Models |
|---|---|---|---|
521991.12 |
Module Is Too Hot And Shut Down. Will Reset After 1 Minute, Direct Drive Range Module (RPM) |
||
521992.03 |
Power quad Auto Dial Potentiometer Signal Voltage Too High, Cab Control Module (DOI) |
||
521992.04 |
Power quad Auto Dial Potentiometer Signal Voltage Too Low, Cab Control Module (DOI) |
||
522011.02 |
CAN BUS Message Issue With Communication Between the Cab Module Front Chassis Module (PTF) |
||
522011.02 |
Internal Software Issue With The OIC Main Control Module, Check For Other Codes |
||
522011.02 |
CAN BUS Message Issue With Communication Between the Cab Module Front Chassis Module (PTF) |
||
522011.02 |
Internal Software Issue With The OIC Main Control Module, Check For Other Codes |
||
522011.09 |
CAN BUS Message Issue With Communication Between the Cab Module Front Chassis Module (PTF) |
||
522011.09 |
Issue With The OIC Main Control Module Can BUS Message, Check For Other Codes |
||
522011.09 |
CAN BUS Message Issue With Communication Between the Cab Module Front Chassis Module (PTF) |
||
522011.09 |
Issue With The OIC Main Control Module Can BUS Message, Check For Other Codes |
||
522011.19 |
CAN BUS Message Issue With Communication Between the Cab Module Front Chassis Module (PTF) |
||
522011.19 |
Internal Software Issue With The OIC Main Control Module, Check For Other Codes Main Control Module (RPT) |
||
522011.19 |
CAN BUS Message Issue With Communication Between the Cab Module Front Chassis Module (PTF) |
||
522011.19 |
Internal Software Issue With The OIC Main Control Module, Check For Other Codes Rear Chassis (RPT) |
||
522011.31 |
CAN BUS Message Issue With Communication Between the Cab Module Front Chassis Module (PTF) |
||
522011.31 |
Internal Software Issue With The OIC Main Control Module, Check For Other Codes Main Control Module (RPT) |
||
522011.31 |
CAN BUS Message Issue With Communication Between the Cab Module Front Chassis Module (PTF) |
||
522011.31 |
Internal Software Issue With The OIC Main Control Module, Check For Other Codes Rear Chassis (RPT) |
||
522077.11 |
There is an issue with the I tec (headland Management) switch, Main Control Module (AIC) |
||
522089.05 |
Low Amps On Gear 1 Solenoid Coil, Gear Shift Module Direct Drive (GPM) |
||
522089.06 |
High Amps On Gear 1 Solenoid Coil, Gear Shift Module Direct Drive (GPM) |
||
522089.07 |
Gear 1 Has Not Been Engaged After Several Attempts By The Module. Gear Now Unavailable. Restart Tractor To Try And Select Gear, Gear Shift Module Direct Drive (GPM) |
||
522089.12 |
Transmission Jumped Out Of Gear 1, Gear Shift Module Direct Drive (GPM) |
||
522089.17 |
It Has Taken Too Long To Engauge Gear 1, Gear Shift Module Direct Drive (GPM) |
||
522089.18 |
Gear 1 Can Not Be Engaged, Gear Shift Module Direct Drive (GPM) |
||
522090.05 |
Low Amps On Gear 2 Solenoid Coil, Gear Shift Module Direct Drive (GPM) |
||
522090.06 |
High Amps On Gear 2 Solenoid Coil, Gear Shift Module Direct Drive (GPM) |
||
522090.07 |
Gear 2 Has Not Been Engaged After Several Attempts By The Module. Gear Now Unavailable. Restart Tractor To Try And Select Gear, Gear Shift Module Direct Drive (GPM) |
||
522090.12 |
Transmission Jumped Out Of Gear 2, Gear Shift Module Direct Drive (GPM) |
||
522090.17 |
It Has Taken Too Long To Engauge Gear 2, Gear Shift Module Direct Drive (GPM) |
||
522090.18 |
Gear 2 Can Not Be Engaged, Gear Shift Module Direct Drive (GPM) |
||
522092.05 |
Low Amps On Gear 3 Solenoid Coil, Gear Shift Module Direct Drive (GPM) |
||
522092.06 |
High Amps On Gear 3 Solenoid Coil, Gear Shift Module Direct Drive (GPM) |
||
522092.07 |
Gear 3 Has Not Been Engaged After Several Attempts By The Module. Gear Now Unavailable. Restart Tractor To Try And Select Gear, Gear Shift Module Direct Drive (GPM) |
||
522092.12 |
Transmission Jumped Out Of Gear 3, Gear Shift Module Direct Drive (GPM) |
||
522092.17 |
It Has Taken Too Long To Engauge Gear 3, Gear Shift Module Direct Drive (GPM) |
||
522092.18 |
Gear 3 Can Not Be Engaged, Gear Shift Module Direct Drive (GPM) |
||
522122.31 |
CAN BUS Message Issue With Communication Between the Dash Module And Other Modules. Check for Other Codes, Dash Module (FCC) |
||
522122.31 |
CAN BUS Message Issue With Communication Between the Dash Module And Other Modules. Check for Other Codes, Dash Module (FCC) |
||
522123.31 |
CAN BUS Message Issue With Communication Between the Dash Module And Other Modules. Check for Other Codes, Dash Module (FCC) |
||
522123.31 |
CAN BUS Message Issue With Communication Between the Dash Module And Other Modules. Check for Other Codes, Dash Module (FCC) |
||
522124.31 |
CAN BUS Message Issue With Communication Between the Dash Module And Other Modules. Check for Other Codes, Dash Module (FCC) |
||
522124.31 |
CAN BUS Message Issue With Communication Between the Dash Module And Other Modules. Check for Other Codes, Dash Module (FCC) |
||
522125.31 |
CAN BUS Message Issue With Communication Between the Dash Module And Other Modules. Check for Other Codes, Dash Module (FCC) |
||
522125.31 |
CAN BUS Message Issue With Communication Between the Dash Module And Other Modules. Check for Other Codes, Dash Module (FCC) |
||
522149.14 |
There is an internal fault with the module software configuration Main Control Module (TIQ) |
||
522149.14 |
Ground Speed Has Been Slowed. Could Be Due To Another Issue. Check Other Error Codes (TID) Direct Drive Gear Shift Module |
||
522149.14 |
There is an internal fault with the module software configuration Cab Module (TIQ) |
||
522149.31 |
Ground Speed Has Been Slowed. Could Be Due To Another Issue. Check Other Error Codes Main Control Module (TIQ) |
||
522149.31 |
Ground Speed Has Been Slowed. Could Be Due To Another Issue. Check Other Error Codes (TID) Direct Drive Gear Shift Module |
||
522149.31 |
Ground Speed Has Been Slowed. Could Be Due To Another Issue. Check Other Error Codes Cab Module (TIQ) |
||
522150.14 |
The Transmission Will Not Shift Due To Possible Engine Overspeed Rear Chassis Module (PTQ) |
||
522188.14 |
Transmission Speed Is Too Fast For Shifting Gears |
||
522189.02 |
There is an issue with the I tec (headland Management) Button Either Cab Module (AIC), Or Arm Rest Module (AIC) If Fitted |
||
522189.03 |
There is an issue with the I tec (headland Management) Button Either Cab Module (AIC), Or Arm Rest Module (AIC) If Fitted |
||
522189.04 |
There is an issue with the I tec (headland Management) Button Either Cab Module (AIC), Or Arm Rest Module (AIC) If Fitted |
||
522189.11 |
There is an issue with the I tec (headland Management) Button Either Cab Module (AIC), Or Arm Rest Module (AIC) If Fitted |
||
522190.03 |
High Voltage On Signal Line From Range E-F Position Sensor Command Quad, Main Control Module (PTQ) |
||
522190.04 |
Low Voltage On Signal Line From Range E-F Position Sensor Command Quad, Main Control Module (PTQ) |
||
522191.03 |
High Voltage On Signal Line From Range C-D Position Sensor Command Quad, Main Control Module (PTQ) |
||
522191.04 |
Low Voltage On Signal Line From Range C-D Position Sensor Command Quad, Main Control Module (PTQ) |
||
522191.07 |
Gear Shift On Shaft 2 Has Not Been Possible. Shaft 2 Has Gears 2/4/6/8, Gear Shift Module Direct Drive (GPM) |
||
522192.03 |
High Voltage On Signal Line From Range A-B Position Sensor Command Quad, Main Control Module (PTQ) |
||
522192.04 |
Low Voltage On Signal Line From Range A-B Position Sensor Command Quad, Main Control Module (PTQ) |
||
522192.07 |
Gear Shift On Shaft 1 Has Not Been Possible. Shaft 1 Has Gears 1/3/5/7, Gear Shift Module Direct Drive (GPM) |
||
522193.15 |
Neutral Position Not Registered On Signal Line From Range E-F Position Sensor Command Quad, Main Control Module (PTQ) |
||
522194.15 |
Neutral Position Not Registered On Signal Line From Range C-D Position Sensor Command Quad, Main Control Module (PTQ) |
||
522196.15 |
Neutral Position Not Registered On Signal Line From Range A-B Position Sensor Command Quad, Main Control Module (PTQ) |
||
522197.04 |
Low Voltage On Signal Line From Range E-F Position Sensor Command Quad, Main Control Module (PTQ) |
||
522198.04 |
Low Voltage On Signal Line From Range C-D Position Sensor Command Quad, Main Control Module (PTQ) |
||
522200.17 |
Low Voltage On Signal Line From Range A-B Position Sensor Command Quad, Main Control Module (PTQ) |
||
522269.07 |
Steering Control Valve Right Sticking Steering Module (XMC) |
||
522269.07 |
Steering Control Valve Right Sticking Steering Module (XMC) |
||
522270.07 |
Steering Control Valve Left Sticking Steering Module (XMC) |
||
522270.07 |
Steering Control Valve Left Sticking Steering Module (XMC) |
||
522288.03 |
High Voltage At Cab Suspension Proportional Solenoid Rear Chassis (CSC) |
||
522288.05 |
Low Amp Draw At Cab Suspension Proportional Solenoid Rear Chassis (CSC) |
||
522288.06 |
High Amp Draw At Cab Suspension Proportional Solenoid Rear Chassis (CSC) |
||
522311.03 |
There is High Voltage Detected on The Rear Window Washer Pump. Rear Chassis Module (VLC) |
||
522311.05 |
There is Low Amps Detected on The Rear Window Washer Pump. Rear Chassis Module (VLC) |
||
522311.06 |
There is High Amps Detected on The Detected on The Rear Window Washer Pump. Rear Chassis Module (VLC) |
||
522312.03 |
There is High Voltage Detected on The Front Window Washer Pump. Rear Chassis Module (VLC) |
||
522312.05 |
There is Low Amps Detected on The Front Window Washer Pump. Rear Chassis Module (VLC) |
||
522312.06 |
There is High Amps Detected on The Detected on The Front Window Washer Pump. Rear Chassis Module (VLC) |
||
522343.03 |
There is High Voltage Detected The Rear Window Heater Pin On The Module Cab Roof Module (RLC) |
||
522343.05 |
There is Low Amps Detected The Rear Window Heater Pin On The Module Cab Roof Module (RLC) |
||
522343.06 |
There is High Amps Detected on The Rear Window Heater On The Module Cab Roof Module (RLC) |
||
522358.31 |
CAN BUS Message Issue With Communication Between the Dash Module And Other Modules. Check for Other Codes, Dash Module (FCC) |
||
522358.31 |
CAN BUS Message Issue With Communication Between the Dash Module And Other Modules. Check for Other Codes, Dash Module (FCC) |
||
522379.03 |
High Voltage On Park Lock Solenoid , Transmission Module IVT (PTA) |
||
522379.04 |
Park Lock Solenoid Voltage Low Solenoid 2 Direct Drive, Rear Chassis Module (PLC) |
||
522379.04 |
Low Voltage On Park Lock Solenoid, Transmission Module IVT (PTA) |
||
522379.05 |
Park Lock Solenoid Low Amp Draw Solenoid 2 Direct Drive, Rear Chassis Module (PLC) |
||
522379.05 |
Low Amps On Park Lock Solenoid , Transmission Module IVT (PTA) |
||
522379.11 |
Park Lock Solenoid Issue, Transmission Module IVT (PTA) |
||
522379.14 |
Park Lock Solenoid High Voltage Solenoid 2 Direct Drive, Rear Chassis Module (PLC) |
||
522379.15 |
Park Lock Solenoid High Amp Draw Solenoid 2 Direct Drive, Rear Chassis Module (PLC) |
||
522379.17 |
Park Lock Solenoid Low Amp Draw Solenoid 2 Direct Drive, Rear Chassis Module (PLC) |
||
522387.07 |
No Movement Of Front Axle When Turn Was Requested |
||
522387.07 |
No Movement Of Front Axle When Turn Was Requested |
||
522389.03 |
High Voltage On Clutch K4 Solenoid, Transmission Module IVT (PTA) |
||
522389.04 |
Low Voltage On Clutch K4 Solenoid , Transmission Module , Transmission Module IVT (PTA) |
||
522389.05 |
Low Amps On Clutch K4 Solenoid , Transmission Module IVT (PTA) |
||
522390.09 |
CAN BUS Message Fault From the implement and the Main Controller on the Tractor Front Chassis Module (PTF) |
||
522390.09 |
CAN BUS Message Fault From the implement and the Main Controller on the Tractor Main Control Module (RPT) |
||
522390.09 |
CAN BUS Message Fault From the implement and the Main Controller on the Tractor Main Control Module (TIQ) |
||
522390.09 |
CAN BUS Message Fault From the implement and the Steering Module (XSC) |
||
522390.09 |
CAN BUS Message Fault From the implement and the Main Controller on the Tractor, Rear Chassis Module (HCC) |
||
522390.09 |
CAN BUS Message Fault From the implement and the Main Controller on the Tractor Front Chassis Module (PTF) |
||
522390.09 |
CAN BUS Message Fault From the implement and the Main Controller on the Tractor Rear Chassis (RPT) |
||
522390.09 |
CAN BUS Message Fault From the implement and the Rear Chassis (SCC) |
||
522390.09 |
CAN BUS Message Fault From the implement and the Front Chassis Module (SCO) |
||
522390.09 |
CAN BUS Message Fault From the implement and the Cab Module (TIA) |
||
522390.09 |
CAN BUS Message Fault From the implement and the Main Controller on the Tractor (TID) Direct Drive Gear Shift Module |
||
522390.09 |
CAN BUS Message Fault From the implement and the Main Controller on the Tractor Cab Module (TIQ) |
||
522390.09 |
CAN BUS Message Fault From the implement and the Steering Module (XSC) |
||
522390.11 |
Tractor Is In Limp Mode (Come Home) Systems Are Disabled Front Chassis Module (PTF) |
||
522390.11 |
Tractor Is In Limp Mode (Come Home) Systems Are Disabled |
||
522390.11 |
Tractor Has Errors And Auto Headland Function Is Disabled Main Control Module (TIQ) |
||
522390.11 |
Tractor Is In Limp Mode (Come Home) Systems Are Disabled |
||
522390.11 |
Tractor Is In Limp Mode (Come Home) Systems Are Disabled, Rear Chassis Module (HCC) |
||
522390.11 |
Tractor Is In Limp Mode (Come Home) Systems Are Disabled Front Chassis Module (PTF) |
||
522390.11 |
Tractor Is In Limp Mode (Come Home) Systems Are Disabled |
||
522390.11 |
Tractor Is In Limp Mode (Come Home) Systems Are Disabled |
||
522390.11 |
Tractor Is In Limp Mode (Come Home) Systems Are Disabled |
||
522390.11 |
Tractor Is In Limp Mode (Come Home) Systems Are Disabled Cab Module (TIA) |
||
522390.11 |
Tractor Is In Limp Mode (Come Home) Systems Are Disabled (TID) Direct Drive Gear Shift Module |
||
522390.11 |
Tractor Has Errors And Auto Headland Function Is Disabled Cab Module (TIQ) |
||
522390.11 |
Tractor Is In Limp Mode (Come Home) Systems Are Disabled |
||
522390.12 |
CAN BUS Message Fault From the implement and the Steering Module (XSC) |
||
522390.12 |
CAN BUS Message Fault From the implement and the Steering Module (XSC) |
||
522390.19 |
CAN BUS Message Fault From the implement and the Steering Module (XSC) |
||
522390.19 |
CAN BUS Message Fault From the implement and the Steering Module (XSC) |
||
522392.03 |
High Voltage On Clutch K3 Solenoid , Transmission Module IVT (PTA) |
||
522392.04 |
Low Voltage On Clutch K3 Solenoid , Transmission Module IVT (PTA) |
||
522392.05 |
Low Amps On Clutch K3 Solenoid , Transmission Module IVT (PTA) |
||
522395.03 |
High Voltage On Clutch K2 Solenoid , Transmission Module IVT (PTA) |
||
522395.04 |
Low Voltage On Clutch K2 Solenoid , Transmission Module IVT (PTA) |
||
522395.05 |
Low Amps On Clutch K2 Solenoid , Transmission Module IVT (PTA) |
||
522399.03 |
High Voltage On Clutch K1 Solenoid , Transmission Module IVT (PTA) |
||
522399.04 |
Low Voltage On Clutch K1 Solenoid , Transmission Module IVT (PTA) |
||
522399.05 |
Low Amps On Clutch K1 Solenoid , Transmission Module IVT (PTA) |
||
522431.11 |
Cab Module (TIA) Internal Issue |
||
522433.03 |
Rear Wiper High Voltage Cab Roof Module (RLC) |
||
522433.06 |
Rear Wiper High Amp Draw Cab Roof Module (RLC) |
||
522434.06 |
Front Windscreen Wiper Slow Speed Circuit High Amp Draw Cab Module (CLC) |
||
522434.06 |
Front Windscreen Wiper Slow Speed Circuit High Amp Draw |
||
522435.06 |
Front Windscreen Wiper Fast Speed Circuit High Amp Draw Cab Module (CLC) |
||
522435.06 |
Front Windscreen Wiper Fast Speed Circuit High Amp Draw |
Search all 14,929 tractor error codes