John Deere Tractor Error Codes for 6110R, 6120R, 6130R, 6145R, 6155R, 6175R, 6195R, 6215R (2015-2021)

Loading...
Error CodeDescriptionTechnical DocumentationMake & Models
524224.02

Rear PTO Switch Signal Issue Either Cab Module (AIC), Or Arm Rest Module (AIC) If Fitted

524224.09

CAN BUS Message Fault, Check For Other Codes Either Cab Module (AIC), Or Arm Rest Module (AIC) If Fitted

524224.09

CAN BUS Message Issue With Communication Between the Cab Module Rear Chassis (RPT)

524224.09

Message Not Received On The State Of The Mud Guard Switches. CAN BUS Message Fault, Check For Other Codes

524224.19

Issue With External PTO Switch. Check Other Error Codes

524224.31

Issue With External PTO Switch. Check Other Error Codes

524225.31

Issue With Signal From Crankshaft Position Sensor

524230.03

Transmission Enable Solenoid High Voltage Rear Chassis Module (PTQ)

524230.04

Transmission Enable Solenoid Low Voltage Rear Chassis Module (PTQ)

524230.05

Transmission Enable Solenoid Amps Low Rear Chassis Module (PTQ)

524230.06

Transmission Enable Solenoid Amps High Rear Chassis Module (PTQ)

524232.03

High Voltage On The Park Lock Pressure Sensor.

524232.04

Low Voltage On The Park Lock Pressure Sensor.

524232.12

Park Lock Pressure Sensors Has Noted The signal Has Not Changed After Park Lock Engage Signal Has Been received

524233.03

High Voltage On Signal From Hydro Speed Sensor, Transmission Module IVT (PTA)

524233.04

Low Voltage On Signal From Hydro Speed Sensor, Transmission Module IVT (PTA)

524233.08

Signal From Hydro Speed Sensor Issue, Transmission Module IVT (PTA)

524234.03

Transmission Enable Solenoid High Voltage Rear Chassis Module (PTQ)

524234.04

Transmission Enable Solenoid Low Voltage Rear Chassis Module (PTQ)

524235.03

Issue With 4WD Solenoid Circuit High Voltage Rear Chassis (CCU)

524235.06

Issue With 4WD Solenoid Circuit High Amp Draw Rear Chassis (CCU)

524239.31

Wheel Speed Sensor Issue, Range Module Direct Drive (PTD)

524252.04

Rear PTO Solenoid Voltage Low Rear Chassis Module (RPT)

524252.05

Rear PTO Solenoid Amps Low Rear Chassis Module (RPT)

524252.14

Rear PTO Solenoid Voltage High Rear Chassis Module (RPT)

524252.15

Rear PTO Solenoid Amps High Rear Chassis Module (RPT)

524252.17

Rear PTO Solenoid Open Circuit Rear Chassis Module (RPT)

524254.02

Problem With The Signals For Transmission Enable And Neutral Rear Chassis Module (PTQ)

524254.03

Transmission Enable Solenoid High Voltage Cab Module (TIQ)

524254.04

Transmission Enable Solenoid Low Voltage Cab Module (TIQ)

524254.31

Transmission Oil Temperature Too Low. Automatic Warm Up Is Active And Transmission Use Is Limited Or Locked Cab Module (TIA)

524259.00

Module Over heating. If the module is not hot it could be an internal issue with the module Cab Module (CLC)

524259.00

Module Over heating. If the module is not hot it could be an internal issue with the module Cab Roof Module (RLC)

524259.00

Module Over heating. If the module is not hot it could be an internal issue with the module Rear Chassis Module (VLC)

524259.15

Module Over heating. If the module is not hot it could be an internal issue with the module Cab Module (CLC)

524259.15

Module Over heating. If the module is not hot it could be an internal issue with the module Cab Roof Module (RLC)

524259.15

Module Over heating. If the module is not hot it could be an internal issue with the module Cab Roof Module (RLC)

524259.15

Module Over heating. If the module is not hot it could be an internal issue with the module Rear Chassis Module (VLC)

524259.16

Module Over heating. If the module is not hot it could be an internal issue with the module Cab Module (CLC)

524259.16

Module Over heating. If the module is not hot it could be an internal issue with the module Rear Chassis Module (VLC)

524264.02

CAN BUS Message Issue With Communication Between the Dash Module and the Main Controller. Check for Other Codes, Dash Module (FCC)

524264.02

There is an internal fault with the module software configuration Cab Module (TIA)

524267.16

Forward Clutch Excessive Slippage Detected, Range Module Direct Drive (PTD)

524267.16

Clutch Eng augment Is Outside The Stored Time Rear Chassis Module (PTQ)

524277.00

Gear Shift Not Possible Due To High Engine RPM Or The Possibility Of An Engine Over Speed If The Shift Is Made. Slow Down, Gear Shift Module Direct Drive (GPM)

Search all 14,929 tractor error codes