John Deere Tractor Error Codes for Tier 3 2008-2012 Models: 5085M, 5095M, 5095MH, 5105M, 5015ML

003719.15

The Calculated Soot Loading In The DPF Is High, However The Regen Switch Is Turned Off. Ensure The Switch Is In Auto Position (ECU)

521000.02

External Hitch Switch Issue, Main Control Module (HCU)

521000.31

External Hitch Switch Issue, Main Control Module (HCU)

521001.02

Rear Hitch Calibration Issue, Main Control Module (HCU)

521001.05

Rear Hitch Control Valve Low Amps, Main Control Module (HCU)

521001.06

Rear Hitch Control Valve High Amps, Main Control Module (HCU)

521001.07

Rear Hitch Control Valve Issue, Main Control Module (HCU)

521001.11

Rear Hitch Control Valve Raise Position Out Of Range, Main Control Module (HCU)

521001.13

Rear Hitch Control Valve Raise Position Out Of Range Calibration, Main Control Module (HCU)

521002.05

Rear Hitch Control Valve Low Amps, Main Control Module (HCU)

521002.06

Rear Hitch Control Valve High Amps, Main Control Module (HCU)

521002.07

Rear Hitch Control Valve, Main Control Module (HCU)

521002.11

Rear Hitch Control Valve Lower Position Out Of Range, Main Control Module (HCU)

521002.13

Rear Hitch Control Valve Raise Position Out Of Range Calibration, Main Control Module (HCU)

522454.03

Main Control Module Has Noted An Issue With The Signal Voltage From The Creep Position Sensor. (PTR)

522454.04

Main Control Module Has Noted An Issue With The Signal Voltage From The Creep Position Sensor. (PTR)

522456.31

Main Control Module Has Noted The Operator Has Changed Gear On The Manual Gearbox Without Using The Clutch. (PTR)

523702.14

Main Control Module Has Noted An Internal Issue When Booting Up. (EIC)

523702.31

Main Control Module Has Noted An Internal Issue When Booting Up. (EIC)

523832.03

Rear Hitch Drop Speed Dial Voltage Issue Main Control Module (HCU)

523832.04

Rear Hitch Drop Speed Dial Voltage Issue Main Control Module (HCU)

523832.13

Rear Hitch Drop Speed Dial Voltage Out Of Range Main Control Module (HCU)

523833.03

Rear Hitch Maximum Height Dial Voltage Issue Main Control Module (HCU)

523833.04

Rear Hitch Maximum Height Dial Voltage Issue Main Control Module (HCU)

523833.13

Rear Hitch Drop Speed Dial Voltage Out Of Range Main Control Module (HCU)

523834.03

The Signal Voltage From The Rear Hitch Height Control Slide is High Main Control Module (HCU)

523834.04

The Signal Voltage From The Rear Hitch Height Control Slide Is Low Main Control Module (HCU)

523834.13

The Signal Voltage From The Rear Hitch Height Control Slide is out of range Main Control Module (HCU)

523842.03

Rear Hitch Draft Control Dial High Voltage Issue Main Control Module (HCU)

523842.04

Rear Hitch Draft Control Dial Low Voltage Issue Main Control Module (HCU)

523843.02

Rear Hitch Cab Raise/ Lower Switch Out Of Range Main Control Module (HCU)

523910.02

Internal Issue Detected In Module, Main Control Module (HCU)

523950.13

Rear Hitch Position Sensor Out Of Range Main Control Module (HCU)

523953.02

Main Control Module Has Noted An Issue With The Signals From The Neutral Switch On The Transmission, High/Low Gear Shift Buttons, Park Lock Switch, Shuttle Lever Neutral Signal. (PTR)

523966.31

Main Control Module Has Noted The COME HOME Fuse Is Fitted. (PTR)

524016.04

Central Control Module Has Noted An Issue With The Ignition Supply Voltage. (CCU)

524020.31

Main Control Module Has Noted The Shuttle Lever Was Not In Neutral When Tractor Was Turned On. (PTR)

524021.31

Main Control Module Has Noted The Shuttle Lever Reverse Signal Issue. (PTR)

524037.02

Main Control Module Has Noted An Issue With The Voltage On The 4WD Circuit. (CCU)

524160.02

Main Control Module Has Noted An Issue With The Signal Voltages From The Shuttle Lever (PTR)

524173.02

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.14

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.15

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.16

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.17

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524173.18

Main Control Module Has Noted An Issue With The Signals From The Clutch Pedal Position Sensor. (PTR)

524223.03

Main Control Module Has Noted The Diff Lock Button Has Been Pressed For Too Long (CCU)

524224.14

Main Control Module Has Noted An Issue With The Signal From The PTO Switch. PTO Switch On Signal Received When Tractor Was Started. (CCU)

524230.05

Main Control Module Has Noted An Issue With The Supply Voltage To The Enable Trans Pressure Solenoid. (PTR)

524230.07

Main Control Module Has Noted An Issue With The Enable Trans Pressure. (PTR)

524234.03

Main Control Module Has Noted An Issue With The Enable Trans Pressure Sensor. (PTR)

524234.04

Main Control Module Has Noted An Issue With The Enable Trans Pressure Sensor. (PTR)

524235.05

Main Control Module Has Noted An Issue With The Voltage On The 4WD Circuit. (CCU)

524252.05

Main Control Module Has Noted An Issue With The Voltage On The PTO Circuit. (CCU)

524254.03

Main Control Module Has Noted An Issue With The Voltage From The Transmission Enable Solenoid. (PTR)

524254.04

Main Control Module Has Noted An Issue With The Voltage From The Transmission Enable Solenoid. (PTR)

524267.15

Main Control Module Has Noted That A Forward/ Reverse Shuttle Was Done At A High Travel Speed. (PTR)