Search all 14,929 tractor error codes
Enter your error code and use the Tractor "Make" and "Model" to narrow down your search results
| Error Code | Description | Technical Documentation | Make & Models |
|---|---|---|---|
000029.03 |
Hand Throttle Signal Voltage Issue (ECU) |
||
000029.04 |
Hand Throttle Signal Voltage Issue (ECU) |
||
000084.07 |
Main Control Module Has Noted A Wheel Speed During A Transmission Calibration. (PTR) |
||
000091.03 |
Foot Throttle Signal Voltage Issue (ECU) |
||
000091.04 |
Foot Throttle Signal Voltage Issue (ECU) |
||
000094.03 |
Low Pressure Fuel Sensor Voltage Too High (ECU) |
||
000094.04 |
Low Pressure Fuel Sensor Voltage Too Low (ECU) |
||
000094.17 |
Low Pressure Fuel Sensor Voltage Low (ECU) |
||
000094.18 |
Low Pressure Fuel Sensor Voltage Low (ECU) |
||
000097.03 |
Water In Fuel Sensor Out Of Range (ECU) |
||
000097.04 |
Water In Fuel Sensor Out Of Range (ECU) |
||
000097.16 |
Water In Fuel Detected, Drain Fuel Filters. If There is A lot of Water Replace Filters and Check Fuel Tank (ECU) |
||
000100.01 |
Engine Oil Pressure Sensor Signal Is Low (CCU) |
||
000100.01 |
Engine Oil Pressure Sensor Signal Is Low (ECU) |
||
000100.04 |
Engine Oil Pressure Sensor Signal Is Low (CCU) |
||
000100.04 |
Engine Oil Pressure Sensor Signal Is Low (ECU) |
||
000105.00 |
The Intake Manifold Air Temp Sensor Is High (ECU) |
||
000105.03 |
The Intake Manifold Air Temp Sensor High Voltage (ECU) |
||
000105.04 |
The Intake Manifold Air Temp Sensor Low Voltage (ECU) |
||
000105.15 |
The Intake Manifold Air Temp Sensor Is High (ECU) |
||
000105.16 |
The Intake Manifold Air Temp Sensor Is High (ECU) |
||
000107.00 |
Dash Module Has Noted An Issue With The Engine Air Filter Blocked. (ICC) |
||
000108.02 |
The Signal From The Internal Barometric Sensor Is Faulty (ECU) |
||
000110.00 |
Engine Coolant Temp High (CCU) |
||
000110.00 |
Engine Coolant Temp High (ECU) |
||
000110.03 |
Engine Coolant Temp Sensor Signal Voltage High (CCU) |
||
000110.03 |
Engine Coolant Temp (ECU) |
||
000110.04 |
Engine Coolant Temp Sensor Signal Voltage Low (CCU) |
||
000110.04 |
Engine Coolant Temp (ECU) |
||
000110.15 |
Engine Coolant Temp High (ECU) |
||
000110.16 |
Engine Coolant Temp High (CCU) |
||
000110.16 |
Engine Coolant Temp High (ECU) |
||
000157.03 |
The Fuel Rail Pressure Sensor Signal Voltage Is Too High (ECU) |
||
000157.04 |
The Fuel Rail Pressure Sensor Signal Voltage Is Too Low (ECU) |
||
000157.10 |
The Fuel Rail Pressure Sensor Signal Voltage Is Erratic (ECU) |
||
000157.17 |
The Fuel Rail Pressure Sensor Signal Voltage Is Low (ECU) |
||
000158.01 |
Main Control Module Has Noted A Low Module Switched 12 volt Supply Voltage. (PTR) |
||
000158.12 |
The Engine ECU Has An Internal Issue. Module Did Not Power Down Correctly. Check Battery And Ignition Supplies To Module (ECU) |
||
000162.02 |
Main Control Module Has Noted An Issue With The Signal Voltage From The Transmission Hi/Low Switch. (PTR) |
||
000162.31 |
Main Control Module Has Noted An Issue With The Signal Voltage From The Transmission Hi/Low Switch. (PTR) |
||
000167.04 |
Dash Module Has Noted A Low Battery/Alternator Voltage. (ICC) |
||
000174.00 |
Fuel Temperature High (ECU) |
||
000174.03 |
Fuel Temperature High Signal Voltage (ECU) |
||
000174.04 |
Fuel Temperature Low Signal Voltage (ECU) |
||
000174.16 |
Fuel Temperature High (ECU) |
||
000190.02 |
Engine Speed Low Main Control Module (HCU) |
||
000190.18 |
Main Control Module Has Noted The Engine Speed Has Not Been Received On The CAN BUS From The Engine Module. (PTR) |
||
000191.00 |
Main Control Module Has Noted The Transmission Speed Sensor Speed Is Too High During Calibration (PTR) |
||
000191.17 |
Main Control Module Has Noted The Transmission Speed Sensor Speed Is Too Low During Calibration (PTR) |
||
000237.02 |
Central Control Module Has Noted An issue With The Stored Tractor Configuration Data (CCU) |
||
000237.02 |
Dash Module Has Noted An issue With The Stored Tractor Configuration Data (ICC) |
||
000237.31 |
Central Control Module Has Noted An issue With The Stored Tractor Configuration Data (CCU) |
||
000237.31 |
Dash Module Has Noted An issue With The Stored Tractor Configuration Data (ICC) |
||
000569.05 |
Issue With Diff Lock Solenoid Circuit (CCU) |
||
000598.02 |
Main Control Module Has Noted An Issue With The Clutch Pedal Sensor. (PTR) |
||
000598.04 |
Main Control Module Has Noted An Issue With The Clutch Pedal Sensor. (PTR) |
||
000611.03 |
There Is A Problem With The Supply Voltage To Injectors (ECU) |
||
000611.04 |
There Is A Problem With The Supply Voltage To Injectors (ECU) |
||
000628.02 |
Central Control Module Has Noted An issue With The Stored Tractor Configuration Data (CCU) |
||
000628.02 |
Main Control Module Has Noted An Internal Issue When Booting Up. (EIC) |
||
000628.02 |
Main Control Module Has Noted An Internal Issue When Booting Up. (PTR) |
||
000628.12 |
Main Control Module Has Noted An Internal Issue When Booting Up. (EIC) |
||
000628.12 |
Dash Module Has Noted An Internal Issue When Booting Up. (ICC) |
||
000628.13 |
Main Control Module Has Noted An Internal Issue When Booting Up. (EIC) |
||
000629.02 |
Internal Issue With Module, Restart Tractor and Check For Other Codes, Suspect Failed Module (ECU) |
||
000629.12 |
Main Control Module Has Noted An Internal Issue When Booting Up. (PTR) |
||
000629.12 |
Internal Issue With Module, Restart Tractor and Check For Other Codes, Suspect Failed Module |
||
000629.12 |
Internal Issue With Module, Restart Tractor and Check For Other Codes, Suspect Failed Module (ECU) |
||
000629.13 |
Internal Issue With Module, Restart Tractor and Check For Other Codes, Suspect Failed Module (ECU) |
||
000630.02 |
Dash Module Has Noted An Internal Issue When Booting Up. (ICC) |
||
000630.13 |
There is an internal fault with the module software configuration Main Control Module (HCU) |
||
000630.14 |
Central Control Module Has Noted An issue With The Rear PTO Speed (CCU) |
||
000630.14 |
Main Control Module Has Noted An Issue With The Transmission Calibration Values. (PTR) |
||
000636.02 |
Issue With Signal From Camshaft Position Sensor High Resistance (ECU) |
||
000636.05 |
Issue With Signal From Camshaft Position Sensor High Resistance (ECU) |
||
000636.06 |
Issue With Signal From Camshaft Position Sensor Low Resistance (ECU) |
||
000636.08 |
Issue With Signal From Camshaft Position Sensor Missing (ECU) |
||
000636.10 |
Issue With Signal From Camshaft Position Sensor (ECU) |
||
000637.02 |
Issue With Signal From Crankshaft Position Sensor (ECU) |
||
000637.05 |
Issue With Signal From Crankshaft Position Sensor High Resistance (ECU) |
||
000637.06 |
Issue With Signal From Crankshaft Position Sensor Low Resistance (ECU) |
||
000637.07 |
Issue With Signal From Crankshaft Position Sensor (ECU) |
||
000637.08 |
Issue With Signal From Crankshaft Position Sensor Missing (ECU) |
||
000637.10 |
Issue With Signal From Crankshaft Position Sensor (ECU) |
||
000651.02 |
Injector Number 1 Code Error (ECU) |
||
000651.05 |
Injector Number 1 High Resistance Error (ECU) |
||
000651.06 |
Injector Number 1 Low Resistance Error (ECU) |
||
000651.13 |
Injector Number 1 Calibration Code Error (ECU) |
||
000652.02 |
Injector Number 2 Code Error (ECU) |
||
000652.05 |
Injector Number 2 High Resistance Error (ECU) |
||
000652.06 |
Injector Number 2 Low Resistance Error (ECU) |
||
000652.13 |
Injector Number 2 Calibration Code Error (ECU) |
||
000653.02 |
Injector Number 3 Code Error (ECU) |
||
000653.05 |
Injector Number 3 High Resistance Error (ECU) |
||
000653.06 |
Injector Number 3 Low Resistance Error (ECU) |
||
000653.13 |
Injector Number 3 Calibration Code Error (ECU) |
||
000654.02 |
Injector Number 4 Code Error (ECU) |
||
000654.05 |
Injector Number 4 High Resistance Error (ECU) |
||
000654.06 |
Injector Number 4 Low Resistance Error (ECU) |
||
000654.13 |
Injector Number 4 Calibration Code Error (ECU) |
||
000676.03 |
Cold Start Relay Is Supplying Voltage When It Should Be Turned Off. (CCU) |
||
000676.03 |
Cold Start Relay Signal When Relay Should Be Off (ECU) |
||
000676.05 |
Cold Start Relay Is Not Supplying Voltage When It Should Be Turned On. (CCU) |
||
000676.05 |
No Cold Start Relay Signal When Relay Should Be On (ECU) |
||
000734.05 |
Main Control Module Has Noted An Issue With The Supply Voltage To The Low Forward Clutch Solenoid. (PTR) |
||
000735.05 |
Main Control Module Has Noted An Issue With The Supply Voltage To The Reverse Clutch Solenoid. (PTR) |
||
000736.05 |
Main Control Module Has Noted An Issue With The Supply Voltage To The High Forward Clutch Solenoid. (PTR) |
||
000752.03 |
Main Control Module Has Noted An Issue With The Shuttle Manual Sensitivity Adjustment Dial Voltage. (PTR) |
||
000752.04 |
Main Control Module Has Noted An Issue With The Shuttle Manual Sensitivity Adjustment Dial Voltage. (PTR) |
||
001136.00 |
Engine ECU Over Heating (ECU) |
||
001136.16 |
Engine ECU Internal Temperature Reading Fault (ECU) |
||
001347.03 |
Fuel Suction Valve Low Resistance Issue (ECU) |
||
001347.05 |
Fuel Suction Valve High Resistance Issue (ECU) |
||
001347.07 |
Fuel Rail Pressure Issue (ECU) |
||
001504.10 |
Main Control Module Has Noted An Issue With The Driver Present Seat Switch. (PTR) |
||
001569.31 |
The Engine Is In An Active Derate Mode, Check For Other Error Codes (ECU) |
||
001638.00 |
Transmission Hydraulic Oil Temperature Is Very High (CCU) |
||
001638.02 |
Trans Oil Temp Below 29C/84F During Hitch Calibration. Main Control Module (HCU) |
||
001638.03 |
Transmission Hydraulic Oil Temperature Sensor High Voltage (CCU) |
||
001638.04 |
Transmission Hydraulic Oil Temperature Sensor low Voltage (CCU) |
||
001638.16 |
Transmission Hydraulic Oil Temperature Is High (CCU) |
||
001873.02 |
Rear Hitch Position Sensor Out Of Range Main Control Module (HCU) |
||
001873.03 |
Rear Hitch Position Sensor Voltage Out Of Range, Main Control Module (HCU) |
||
001873.04 |
Rear Hitch Position Sensor Voltage Out Of Range, Main Control Module (HCU) |
||
001873.11 |
Rear Hitch Position Sensor Voltage Out Of Range, Main Control Module (HCU) |
||
001873.13 |
Rear Hitch Calibration Issue, Main Control Module (HCU) |
||
001881.03 |
Draft Pin Sensor Signal Voltage High, Main Control Module (HCU) |
||
001881.04 |
Draft Pin Sensor Signal Voltage Low, Main Control Module (HCU) |
||
001881.13 |
Draft Pin Sensor Out Of Range, Main Control Module (HCU) |
||
001883.00 |
Central Control Module Has Noted An issue With The Rear PTO Over Speed (CCU) |
||
001883.01 |
Central Control Module Has Noted An issue With The Rear PTO Low Speed (CCU) |
||
002000.09 |
Main Control Module Has Noted There Is Missing CAN BUS information From The Engine Module. (EIC) |
||
002003.09 |
CAN BUS Message Issue With Communication Between the Engine Module and the Main Controller. Check for Other Codes |
||
002818.31 |
Operator Seat Switch Not Activated With The PTO Switched On (CCU) |
||
002820.31 |
Operator Seat Switch Not Activated With The Shuttle Lever Is Switched On (PTR) |
||
002825.07 |
Main Control Module Has Noted An Issue With The Park Brake Active When But The Shuttle Lever Is Not In Neutral. (PTR) |
||
003509.03 |
Central Control Module Has Noted A High Voltage On The 5 volt Sensor Supply Circuit. (CCU) |
||
003509.03 |
Main Control Module Has Noted An issue With 5 Volt Sensor Supply Voltage. (PTR) |
||
003509.03 |
Issue with module 5v supply Over 5v Detected Cab Control Module, Main Control Module (HCU) |
||
003509.03 |
The Sensor Supply 5 Volt Voltage Is High Engine Module (ECU) |
||
003509.04 |
Central Control Module Has Noted A Low Voltage On The 5 volt Sensor Supply Circuit. (CCU) |
||
003509.04 |
Main Control Module Has Noted An issue With 5 Volt Sensor Supply Voltage. (PTR) |
||
003509.04 |
Issue with module 5v supply Low Voltage Cab Control Module, Main Control Module (HCU) |
||
003509.04 |
The Sensor Supply 5 Volt Voltage Is Low Engine Module (ECU) |
||
003510.03 |
The Sensor Supply 5 Volt Voltage Is High Engine Module (ECU) |
||
003510.04 |
The Sensor Supply 5 Volt Voltage Is Low Engine Module (ECU) |
||
003511.03 |
Sensor Supply High Voltage Foot Throttle Position Sensor (ECU) |
||
003511.04 |
Sensor Supply Low Voltage Foot Throttle Position Sensor (ECU) |
||
003597.18 |
Engine Module Battery Voltage Supply Low (ECU) |
||
003695.14 |
The Calculated Soot Loading In The DPF Is High, However The Regen Switch Is Turned Off. Ensure The Switch Is In Auto Position (ECU) |
Search all 14,929 tractor error codes